need help!!! Aux power wire.

Y

Yoshimtz2

New Member

Aug 31, 2013

18

5

3

• Nov 28, 2013

• #1

I do not have the manual, and install the winch, but I need to know which wire is the power cut, someone could help me with that, a picture or manual to know which is, thank you very much, really appreciate it.

translated using google translate

 

Admin

HondaSxS.com

Advertisment

 

ohanacreek

My EcoBoost has I4WD

Moderator

Lifetime Member

Jul 25, 2013

11,346

32,050

113

Shelby County, Alabama

Ownership

1. 
   1000-5

• Nov 28, 2013

• #2

Re: need help!!!

There is a black/white wire on the back side of the fuse panel, look at the instructions for the Aux switch panel it tells you exactly which wire it is.

 

Hondasxs

Club Founder

Staff member

Lifetime Member

Supporting Member

Feb 13, 2013

18,500

67,170

113

Charlotte, NC

HondaSxS.com

Ownership

1. 
   1000-5
2. 
   Talon R

• Nov 28, 2013

• #3

[album]608[/album]
Here is the instructions in print so it can be translated.
#8. Remove the fuse box cover.
Release the fuse block from the side of the
compartment using a small flat blade screw driver to
release the locking tab.
#9. Turn the fuse block over and connect the power
harness wire tap connector to the White/black wire
in the position shown. Be sure the tap connector is
locked closed.
- White/Black wire is on second row, fith wire from left

 

ohanacreek

My EcoBoost has I4WD

Moderator

Lifetime Member

Jul 25, 2013

11,346

32,050

113

Shelby County, Alabama

Ownership

1. 
   1000-5

• Nov 28, 2013

• #4

Bingo thanks HondaSxS

 

Y

Yoshimtz2

New Member

Aug 31, 2013

18

5

3

• Nov 28, 2013

• #5

I'm not sure that's what I want, I say the cables are on the side of the steering wheel coming from the ignition switch, to turn on the car and has power the winch, or turn it off and shut off power to the winch.

Translated with Google translate

 

ohanacreek

My EcoBoost has I4WD

Moderator

Lifetime Member

Jul 25, 2013

11,346

32,050

113

Shelby County, Alabama

Ownership

1. 
   1000-5

• Nov 28, 2013

• #6

That wire on the fuse block is switched with the ignition. When the switch is on the wire has power when it's off it's without power.

 

Y

Yoshimtz2

New Member

Aug 31, 2013

18

5

3

• Nov 28, 2013

• #7

Well, try it, right now I say if it turned out, and send you pictures of winch already installed, choose to keep it simple is always better to do, so the mount winch, is no big deal, but it has 4-point restraint with 8 screws total plate and the winch is mounted with 4 screws, the cable can deliver very well up and down as well as sideways, without touching defense, then to avoid problems with bending or reaching the same cable.

Thank you very much for the help, clarify doubts and for the prompt reply

Translated with Google translate