P1000 1000 Back Up Alarm - officially confused about the wiring

[GGreen]

Attempting to install the Honda brand back up alarm. So the Alarm install instruction say that the 2016 Pioneer ALSO requires the 08V71-HL5-A00 accessory wiring harness. But anywhere I go to order it, the message is that it DOESN't fit my 2016 Pioneer 1000.

Anybody done this? Do I actually need yet another part to install this? Pretty pricey for what looks like a cheapo back up alarm. (Also didn't realize I have to remove 4,306 fasteners and bolts to install the 'mount' and alarm, but that's a whole 'nother bucket of fish.)

All replies really appreciated! Thanks, gang!

 

[Admin]

 

[elkaholic]

The harness may not fit your 16. It did not fit on my 16. Colors lined up but the connector had changed at some point. It was still helpful but I simply cut up an expensive harness for two wires


Sent from my iPhone using Tapatalk

 

[BWAF]

Attempting to install the Honda brand back up alarm. So the Alarm install instruction say that the 2016 Pioneer ALSO requires the 08V71-HL5-A00 accessory wiring harness. But anywhere I go to order it, the message is that it DOESN't fit my 2016 Pioneer 1000.

Anybody done this? Do I actually need yet another part to install this? Pretty pricey for what looks like a cheapo back up alarm. (Also didn;t realize I have to remove 4,306 fasteners and bolts to install the 'mount' and alarm, but that's a whole 'nother bucket of fish.

All replies really appreciated! Thanks, gang!

I have the 1000-5 2016 model Deluxe and from what I can tell the plug-in is already there just to hook the Beeper up I used mine for backup lights so, I have not done

Sent from my SM-G930U using Tapatalk

 

[BWAF]

Sorry no help I would listen to the guy that has done it

Sent from my SM-G930U using Tapatalk

 

[ToddACimer]

Attempting to install the Honda brand back up alarm. So the Alarm install instruction say that the 2016 Pioneer ALSO requires the 08V71-HL5-A00 accessory wiring harness. But anywhere I go to order it, the message is that it DOESN't fit my 2016 Pioneer 1000.

Anybody done this? Do I actually need yet another part to install this? Pretty pricey for what looks like a cheapo back up alarm. (Also didn;t realize I have to remove 4,306 fasteners and bolts to install the 'mount' and alarm, but that's a whole 'nother bucket of fish.

All replies really appreciated! Thanks, gang!

That is not the correct harness. The harness you need is 08Z02-HL3-A00



Honda Pioneer 700 Accessory Sub Harness 08z02-hl3-a00 | eBay

 

[GGreen]

That solves it! Thanks VERY much!

 

[OnTheJob]

That is not the correct harness. The harness you need is 08Z02-HL3-A00



Honda Pioneer 700 Accessory Sub Harness 08z02-hl3-a00 | eBay

I used this exact harness for my back up lights and plugs right in.

 

[BWAF]

I used this exact harness for my back up lights and plugs right in.

Did you put relay in or straight to lights

Sent from my SM-G930U using Tapatalk

 

[ToddACimer]

Did you put relay in or straight to lights

Sent from my SM-G930U using Tapatalk

I went straight to the lights. I bought 3.5" Quadboss lights

 

[BWAF]

I went straight to the lights. I bought 3.5" Quadboss lights


View attachment 76461

I put in two of the small little eagle eyes and I'm already on my second set in a year it just keeps burning them out maybe they're too small ?

Sent from my SM-G930U using Tapatalk

 

[GGreen]

That is not the correct harness. The harness you need is 08Z02-HL3-A00



Honda Pioneer 700 Accessory Sub Harness 08z02-hl3-a00 | eBay

I installed the alarm today. Turns out, there was no supplemental harness needed at all (at least on my 2016 1000-3P.)

The harness may be needed if you want to install something additional, maybe backup lights, but to just install the alarm, there was a 2 pin connector with a dummy plug in place - just plugged the alarm into it, works a treat.