BOX1

P1000 19 p1K-5 LE build!!

Longrod88302

Longrod88302

Active Member
Nov 23, 2020
45
149
33
Florida
Ownership

  1. 1000-5
So finally getting going on this thing! Thanks to all the information and direction from you guys on here!! So I’ll be uploading pics and maybe a vid or two on the progress. So it’s a 19 p1k-5 LE.
So far I’ve already got the 4500lb winch mounted up with a rocker switch on the dash just left of the steering wheel, and just got the roof on yesterday. Also got the big gun stainless kit in and on last night too! I’ve got the wheels in and now just waiting on the tires.😬 wheels are race line A71b mambas 14x8 4+4 and tires are tsl boggers 28x10x14. so I’ll be going over the qs3 adjustments and other mods as they come! Also ordered tradinghouse outdoors floor mod kit and look forward to documenting the install and effectiveness of that!!! A little different than most pioneer builds I’ve see and a little in the grey area so hopefully this will shine some light on “what if” for some people. Thanks!! F0970DA4 181E 453A B167 1005CDF4FC9D
B648B2CA DDA1 4DB5 98AC 99446579CE4C
8664E3C0 AAD0 4D17 A054 34566DEE01F7
B583AE0E D171 45DC AC3F B7FB8E4F1D06
525B2D18 0B5B 439E BCAE A3DAF003A6BF

FB37E5CA 20F1 4BD7 AB72 8F83255FC23F
93E31D9F 37AA 4ADA 909B C6B2A300FEF3
4E8A043E 5642 4035 B37C BCE35170AD7E
1E0E8A95 B522 413E 9779 2212912B0356
 
Longrod88302

Longrod88302

Active Member
Nov 23, 2020
45
149
33
Florida
Ownership

  1. 1000-5
Well talked to a gentleman about the bead lock and it looks like I’m good and don’t need the spacers! So I got one finally done and aired up and wouldn’t ya know it the lug nuts that I thought would work don’t😂 so now I’ve got two days to get the other three done before the new lug nuts get here haha! here’s a few pics of the one on and hand tight nuts enough to set it on weight to check full lock clearance and it’s looking good even with the 8 wides and I could be happier🤟🏻 the shocks are still at stock setting so I’ve got plenty of wiggle room almost makes me wish I went a size bigger haha!
2A7099F2 AF5E 40B0 8618 8473F1EF6389
D8BDD8D6 8913 49DA 9A3F CB827ED6DD09
47619593 402B 4606 AC05 FE8400BFB770
CFC62A52 3367 4EC6 9C00 003D1AC78B88
2B48619F 371B 4CA7 8711 0220234BD15F
EE2DB498 1149 4525 BE39 A38285CEB003
0F3E05AD 44E2 4A82 84B7 8C944B7BD654
99DDE4BF E48B 4022 9608 CEC46955F944
E0ABF4FC 86AB 4821 832B 957A13692971
 
Longrod88302

Longrod88302

Active Member
Nov 23, 2020
45
149
33
Florida
Ownership

  1. 1000-5
*UPDATE* got them mounted!!! Could not be happier with it! Coil overs have not been touched! Completely untouched suspension, and clears 28/10 boggers on 14x8s 4+4 🤯 you can see in the one pic it’s very close to that corner buuuut that will be gone just as soon as I get the floor mod installed!! I don’t know if any body on here has a lot of experience with beadlocks but I have one that has an outside wobble like the whees bent but the wheel is perfect. I think I can see a slight difference in the edge around the lock ring. so as of tonight I have not broke it down to check and reset it. So hopefully it will be nothing! Also I’ll have an update on the big gun exhaust soon as soon as the part comes in!! Thanks for the support guys!!!
10D5611C CFA3 4BB9 B0C0 282FF336A284
03974D57 74F2 4BEA 9EA2 4312C7C683D4
F68F6E67 F0D4 44F2 A640 44AFB5E71833
539481F5 2E9E 4C40 AD57 EB9D3E7261BD
9F2EE5DD 0AFE 45D2 9CE9 5B872E95D61D
1DB950F8 211F 4797 97FD 038653079970
96BFB298 9936 46EA B3EA B385C0DF9614
31DBCF56 AB71 4FA4 B7B7 252BFF01A30A
 
Isaiah

Isaiah

Well-Known Member
Dec 30, 2019
2,191
6,964
113
Altamont TN
Ownership

  1. 1000-5
*UPDATE* got them mounted!!! Could not be happier with it! Coil overs have not been touched! Completely untouched suspension, and clears 28/10 boggers on 14x8s 4+4 🤯 you can see in the one pic it’s very close to that corner buuuut that will be gone just as soon as I get the floor mod installed!! I don’t know if any body on here has a lot of experience with beadlocks but I have one that has an outside wobble like the whees bent but the wheel is perfect. I think I can see a slight difference in the edge around the lock ring. so as of tonight I have not broke it down to check and reset it. So hopefully it will be nothing! Also I’ll have an update on the big gun exhaust soon as soon as the part comes in!! Thanks for the support guys!!!View attachment 248918View attachment 248919View attachment 248920View attachment 248921View attachment 248922View attachment 248923View attachment 248924View attachment 248925

looks great! those tires look cool but they wouldnt be appropriate for my type of riding but they sure look cool!🤣
 
P1K5Dave

P1K5Dave

Well-Known Member
Lifetime Member
Club Contributor
Jul 11, 2020
2,138
8,011
113
Petoskey, MI
Ownership

  1. 1000-5
Meat!

We ride a couple miles of pavement to get to our trails. I wonder how much I'd have to crank up the stereo with those vs. my Maxxis Liberty's (basically an all-terrain truck tire style.)
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!