TxDoc
Well-Known Member
Lifetime Member
Mudder
NTC Ambassador of Walls
Lifetime Member
That works, until you upgrade to power steering. But you have the bed for it.
The PS unit takes up space on the drivers side.
The PS unit takes up space on the drivers side.
SILVER_ALERT
HONDA SXS Club Flounder
Lifetime Member
Supporting Member
I put one of those in my P5 about 4 years ago. I was a little concerned that the heat from the radiator might melt it, but no problems. Got mine at Lowes.
Have you fastened it down at all or is it just sitting there?
Edit: Thanks for the idea guys. Found a 12 qt Rubbermaid in the house. Formed a relief for the rad overflow hose and mounted container to one side so overflow bottle can still be accessed. Also tie wrapped in place so won’t move and then filled holes with some gasket maker. Tie wraps can wear on metal, definitely take the paint off, so I use these new grip lock tie wraps that have a rubber bead bonded to inside, they are also removable.
Last edited:
trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
Where, that's a bluetooth speaker right? You don't mean just tucking it behind there do you?
trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
advertisement
Mudder
NTC Ambassador of Walls
Lifetime Member
Its got a key lock on it. Some pouch I guess. If I had a 520, a Chattanooga Choo Choo
PVC Pipe with cap on each end with a lock!
The Green Goat
LGBTQ Compliance Officer -Lotta gays in this place
Lifetime Member
Supporting Member
Not a bad idea! If I wasn't putting a speaker there I would do that.
I thought he meant once ya buy upgrades for a Pioneer, you cant afford a wallet or a phone anymore... 
That is cool. Very nice idea. I too thought it was a speaker at first. PVC with a latch and lock. Very good thinking.
Similar threads
- Sticky
- FrostedNoobFlakes
- Pioneer 500/520 Accessories and Modifications
