P1000 CFab arms Install Advice

[perry]

Looking for any pointers on doing the install on the cfab a-arms with the lift built in.
will post some pix when i unbox them.

 

[JTW]

Tighten all the bolts...

@Kilo427 @Hazard

 

[knuckledeep]

Looking for any pointers on doing the install on the cfab a-arms with the lift built in.
will post some pix when i unbox them.

make sure you grease the bolts and put a spacer on each side of the heim joint. are yours coming with the ball joints already installed or are you doing it

 

[perry]

make sure you grease the bolts and put a spacer on each side of the heim joint. are yours coming with the ball joints already installed or are you doing it

I filled the tube with grease and put some on the inside of the bolt on the top a arms and put the spacer on each side and one washer on the back side of back spacer. Got the front done and will be working on the back soon. Looking good on the front what a difference in the look on the front.

 

[knuckledeep]

I filled the tube with grease and put some on the inside of the bolt on the top a arms and put the spacer on each side and one washer on the back side of back spacer. Got the front done and will be working on the back soon. Looking good on the front what a difference in the look on the front.

post some pics when you get it done

 

[Farmerjohn]

Any before and after pics?

 

[Kilo427]

Tighten all the bolts...

@Kilo427 @Hazard

Faaaaah Q

 

[JTW]

Faaaaah Q

Lmao

 

[perry]

will post some in a couple days still working on it.

 

[knuckledeep]

will post some in a couple days still working on it.

any trouble installing them

 

[perry]

No Problem at all. They bolted right up and I had room for a washer on the 4 hime joints on the front. They need to address the break lines on the front will come up with a clamp around the a-arm to bolt the break line bracket to.

 

[Afafaf]

Does any one have pictures of the cfab a arms with stock rims. Just wondering how it would look

 

[Alowery]

Did you happen to have any problems with the CV axles polling after install ?

 

[P1K5Dave]

Did you happen to have any problems with the CV axles polling after install ?

Did you mean popping?
If you're running stock axles with 3" arm lift, it's a good idea to avoid hard turns in 4wd.

 

[Alowery]

Did you mean popping?
If you're running stock axles with 3" arm lift, it's a good idea to avoid hard turns in 4wd.

Yes I meant popping and thanks for the info. Basically I needed to relaxe the axles before applying full weight of the vehicle. The problem is now resolved.

 

[Robobrainiac]

Just to dig up an old thread


I ordered my c-fab arms today and look forward to installing them

 

[chucksmith0706]

I love mine. My bike with 30” rock a Billy’s did very well in Hot Springs ORV park.


Sent from my iPhone using Tapatalk

 

[chucksmith0706]

Well worth it to me.


Sent from my iPhone using Tapatalk

 

[Robobrainiac]

View attachment 365938
View attachment 365939
View attachment 365940
Well worth it to me.


Sent from my iPhone using Tapatalk

Those look awesome! Mine are still processing.

 

[packer58]

Sweet, looks great ..