P700 Fender Flares

[Trademark]

So I did some hunting over Thanksgiving and realized how bad the mud slinging issue is. I didn't want to do anything but the Honda fender flares for looks but I think I'm going to have to. I've seen that several people put the mud busters on the back, but I've also seen people making their own. I checked up at Home Depot for something I could use to make them but no luck. To anybody that made their own, where did you find your materials?

 

[Admin]

 

[Gator]

A year or two ago, a lot of people were adding fender flares.
Soon after a lot of people were busting fender flares as they dragged them against trees.
I bought a set (I can't even remember where) but never put them on because so many people were tearing theirs off.

My advice is to use something flexible, so that it can just flip right back into position.

 

[Farmer]

We've heard this complaint since the Pioneer came out. My original thoughts were.... Well, it's an off road vehicle, you're gonna get dirty. But I've learned to understand that people have better things to do than wash their wheeler after you ride it. There's been so many DIY posts on this that I bet a simple search would reward you with a wealth of information.

Did you get anything hunting?

 

[N8theGR8]

My dad made some flaps out of black plastic barrels but you have the "rigid" issue again. I am thinking about exploring with this neoprene rubber. Thinking about making dust guards for the doors as well with this.

https://www.amazon.com/gp/product/B016C5G8UC/?tag=sxsweb24-20

 

[Schocj]

My dad made some flaps out of black plastic barrels but you have the "rigid" issue again. I am thinking about exploring with this neoprene rubber. Thinking about making dust guards for the doors as well with this.

https://www.amazon.com/gp/product/B016C5G8UC/?tag=sxsweb24-20

did you experiment with the Neoprene and if so how did that work out for you

 

[N8theGR8]

did you experiment with the Neoprene and if so how did that work out for you

I did not. I came across the plastic barrels so I just heat molded those and attached with plastic rivets.

 

[pappyo]

Made several sets of fender flairs for both -- ( P500 & P700 ) -- out of the -- Top Edge -- of Over The Rail Truck Bed Liners.
Made inner fender & floor protectors for both P500 & P500 -- ( out of bedliner & tailgate protectors )

 

[Smoking Joe]

We've heard this complaint since the Pioneer came out. My original thoughts were.... Well, it's an off road vehicle, you're gonna get dirty. But I've learned to understand that people have better things to do than wash their wheeler after you ride it. There's been so many DIY posts on this that I bet a simple search would reward you with a wealth of information.

Did you get anything hunting?

Ok seriously...did you get anything hunting? Don't leave us hanging! Haven't been hunting since November!

 

[Farmer]

@Trademark never replied to my question but....

I didn't shoot a deer in 2019. Harvest was a nightmare that year. 2020 was opposite...we finished all crops by October 15 and I filled my tags soon after.

 

[Smoking Joe]

I had primer issues with my muzzleloader during last deer season! Luckily I got a moose in December 2019!