Multi finally got around to make a snorkel

[Dragon21]

Finally able to get around to making the snorkel. I dont mud ride, but you never know. I still gotta do all the vent lines this week.

I cut the stock intake about halfway up the straight section and installed a 2" fernco. I ran from there up to a 45* and 22.5* fitting. From there was straight down to behind the seatbelt to a 90* fitting. That 90 goes into a 45 with another 45 conneceted to it. Short straight section up to a 45 and another 45. After that I did a small nipple into another 2" fernco. I decided to use this here for a little flex and also if the top was hit somehow it wouldnt stress the entire snorkel. After that fernco I ran straight up to the top and used a 90 and 45.

 

[Admin]

 

[swsebek]

Nice work

 

[sek-hunter]

Looks great!


Sent from my iPhone using Tapatalk

 

[ckhenshaw4]

Looks good, nice job.

Sent from my Nexus 7 using Tapatalk

 

[Superfan75]

That's awesome. I'm going to have to try that. Hopefully it'll come out somewhere near as good as yours did.

 

[Roger1963]

Hi, I have a 2017 pioneer 700-4 and am considering buying a kit (warrior). I like what you have done here. Do you have a parts list and possibly the dimensions you can share? Or for the 189.95 US dollars I can buy a kit. I am not talented as what you are from what I see of your talent. Good work.

Thanks,

Roger