P700 Fun time tonight

[Backwoods]

I am going to do everything tonight hopefully except no switches waiting for them and switch plate with 2 USB ports to show up . Switches coming from Amazon and plate from PBR.

 

[Backwoods]

I prefer Miller lite but I got plenty of this.

 

[Tuco69]

Post pics when done. Looks like the whole state will be wet for the next few days. I’ll probably be in the garage too.

 

[Tuco69]

I prefer Miller lite but I got plenty of this.

Free beer=good beer

 

[Diverguy]

I just brought mine home from my cabin to add my winch, bumper light, reverse light, rock lights, and cab lighting. I also got the switch with 2 usb ports, as well as a volt meter built in. Also adding fender flares and floor mat.

 

[1rooster]

I prefer Miller lite but I got plenty of this.

You got a mount for that winch?? Hope everything goes well!

 

[Backwoods]

I got winch wired and mounted , wire and relay, fuse in for lights. I will mount them tonight when when we get back from visiting my daughter.

 

[Backwoods]

Hopefully my plate and switches will be here soon,but a couple more hours and every thing except that will be done. I put bumper back before I stopped

 

[Backwoods]

 

[Backwoods]

I think I'll will wait till tomorrow. Just got home from Calera A la. It's supposed to rain anyway which seems to be an every weekend thing lately .

 

[Backwoods]

I gave light bar wiring a test run before mounting and the switch stayed lit up with key out of switch. I don't want it to kill my battery can I fix by removing a jumper on rocker switch? Here's a picture of switch. I have held off running to ace hardware to get rest of mounting stuff because if the switch kills my battery it won't be of any use.

 

[Backwoods]

I googgled 5 pin rockers it looks like they put a jumper between fused power and rocker switch lights I think if I cut jumper and used a switched wire like white on acc plug that would only let switch light up when key was on. Does that sound right?.

 

[Tim-1000 XT-R]

I googgled 5 pin rockers it looks like they put a jumper between fused power and rocker switch lights I think if I cut jumper and used a switched wire like white on acc plug that would only let switch light up when key was on. Does that sound right?.

You are correct. I have the switch light run to the acc. plug and it turns on with the key.

 

[Backwoods]

Thank you i mounted light bar i will aim it tonight. I came with a rocker switch but a have a sasquach one on the way . And still waiting on switch plate to show up.

 

[1rooster]

Where did you mount the light bar ? I have been thinking about getting one if I can find a good deal

 

[Backwoods]

Where did you mount the light bar ? I have been thinking about getting one if I can find a good deal

I mounted it on top of bumper , it is a flood spot combo. I will see how it does tonight and get it aimed, I will paint brackets with acrylic paint after I get it pointing like I want it. I rigged up switch so I can try it . My plate should be here any time it's been 3 days since I ordered it. Don't laugh at switch to bad it's temporary.

 

[Backwoods]

The switch for my rear light showed up but I won't do any thing else till my plate shows up. I stole the rear light switch from jackels thread I thought it was cool.

 

[Backwoods]

More goodies 2 more switches and I will have everything to complete

 

[Backwoods]

I am going to work on it some more l got busy, lazy, put it off. I got to get my winch working shouldn't take long think it's how I hooked my rocker switch up.

 

[Backwoods]

Winch works fine new rocker switch is bad. Back to Amazon.