BOX1

Gauge Cluster Relocation Box with plug and play harness

Status
Not open for further replies.
S

Silveradodriver

Guest
Up date 4/22: Hey guys, I'm new to the forum. Picked up my first Honda product last fall (2020 x-4). From day one the location of the cluster drove me nuts. Couple months ago, I got started on a new box for it. I can finally say it’s done. I'm comfortable enough now to offer them to purchase. Cluster and column cover was measured using a CMM (coordinate measuring machine) and was drawn up with ProE. I made up multiple versions of it and tested them out over winter. My piece has multiple features on it. Sun visor to help block some light to see the screen better. Have a couple built in radiuses on the bottom to help spread out the load and help with the vibrations. The rear has some friction fit guests to also help with the vibrations, and here is a cutaway on the rear/bottom for room for the wires. I make them out of PETG plastic which withstands very well to the sun and heat.

Currently, I’m only selling the cluster box. I do NOT have anything made up to fill the hole where the cluster used to be. I put a piece of aluminum over my opening to mount a GPS to it. I also do NOT have anything for the models with the “live”.

I will be offering a few color options:

Jet Black

Blue

Orange

Green

Red

White

Gray

Please look at the sample colors.

These are built to order. Each one takes about 20 hrs to print. I have a spread sheet set up with names and colors to help keep order to who’s gets shipped next. I will collect the $ b4 I ship your part.

I will be providing one longer main screw and 2 self-tappers with the box.

You will need to get 2 wires about 20” long and either 4 butt connectors or solder them together.



110.00 shipped to lower 48 states. USPS.

PayPal or Venmo. (with PayPal, 110 sent to friend or 113 as goods).

If you would like one please PM me.

Should have plugs and terminals tomorrow to start making plug and play harnesses. Hope to get some made up and tested this weekend.

If all goes as planned I should have some ready to ship next week.

Kits with box and harness will be 150.00 shipped to lower 48.




I may also design one with 2 little diodes installed on the top to hook up to signal markers. If there is enough interest, I will make them up.



Thanks for looking. Kyle DV.

172250189 881644002403154 5500935705251555139 n 172614555 481910492998970 4334136037885034859 n 172639678 1834440323388764 1996348358528362579 n 173046983 1845406652288496 2942333409339970633 n 173130530 377696116855958 7477024522581221839 n 173667365 193933422338752 8140747993370118948 n 173685976 779681312680011 8328674227018836705 n 173760330 267231058405895 5555019473449018991 n
175649015 252321579923604 1292183461641052193 n
175951088 1426189717729888 2159321705436044761 n
Prusament petg jet black 1kg Prusament petg prusa orange 1kg Prusament petg signal white 1kg Prusament petg ultramarine blue transparent 1kg Prusament petg urban grey 1kg
176168400 254177389778308 26036502463638174 n
176226381 167449055258445 1152056354333863052 n
Prusament petg carmine red transparent 1kg Prusament petg neon green transparent 1kg 1619095206768
 
Last edited:
  • Like
Reactions: geohank
I

Irgu4u

New Member
Nov 22, 2020
10
9
3
OHIO
Ownership

  1. Talon X
Are you checking your PM’s? Message sent
 
S

Silveradodriver

Guest
All pm's relied to. Was out of town in no mans land with no service (Upper MI).
 
S

Silveradodriver

Guest
Got a blue one ready to ship. Guy backed out on order.
 
sspeederr

sspeederr

Well-Known Member
Lifetime Member
Supporting Member
May 10, 2020
391
661
93
24701
Ownership

  1. Other Brand

  2. Talon R
Would have been really cool if you had asked my permission to use my video in your commercial venture before using it.
i totally agree @TerryH this guy even purchased a pod from me witch i asked @PaulF prior to even posting forsale on forum. copied my base design and trying to push this off as his own would of been really nice to of been asked if it would be ok to post here seeing as i am still selling them. I at least asked for permission from Paul witch I got as a common curiosity because it is the right thing to do and I did not purchase a kit from Paul to start with Paul in turn thanked me for asking and gave me his approval. We are all adults here no need in stepping on someone's toes or not being curiosity
 
Last edited:
  • Like
Reactions: TripleB and PaulF
Montecresto

Montecresto

Montecresto el segundo
Lifetime Member
Supporting Member
Club Contributor
Jan 17, 2016
22,587
34,173
113
Eastern oklahoma
Ownership

  1. Other Brand

  2. 500

  3. 1000-3

  4. 1000-5

  5. Talon x4
Would have been really cool if you had asked my permission to use my video in your commercial venture before using it.
Not even sure Richard would appreciate someone joining just to sell stuff either...
Guess you need to trademark your material Terry...🤔
 
S

Silveradodriver

Guest
Good morning gentlemen.

Paul, I apologize you are upset about me posting your video. I’m confused though… I was under the impression YouTube was a public web page and has sharable content? Also thought I was helping you out getting you more views, likes, and subscribers?? If I’m not mistaken you even, ask for people to like and subscribe at the end of the video? Also let me point out there is even a “share” button below the video… If you want to limit your video sharing, then I would recommend you removing it from YouTube? Again, I apologize for getting you upset. I guess I was misled being that its on YouTube and has a “share” link. I did give you credit also in my post.



Sspeederr, we had this discussion in the private messaging. Id be more than happy to go over this again. I have been working on mine for about 3 months off and on. Mine was designed using a CMM (coordinate measuring machine). I purchased yours to review it and compare it to mine. I used yours for about 50 miles. This is called a “test buy” (also called a “competitive product analysis”). This is a common practice when you design and produce products you are looking to sell. I evaluated your product mainly to justify the selling price of mine. I needed to have justification if mine was worth more or less than yours. My analyzing showed yours was a little brittle and little unstable on the steering column. Not saying there is anything wrong with yours. You get what you pay for.

Mine has a few different features and looks quite a bit different than yours. Looking at pics, comparing yours to Paul’s yours has a lot more resemblance to each other. Mine has a sun visor, a couple of built in radius’s, and some friction fit guests on the back. I don’t know where you are coming off and saying I copied your design. Again, yours looks very similar to Paul’s who I think was the first to design one…
 
  • Like
Reactions: Patriotbuilders3608
TerryH

TerryH

Well-Known Member
Supporting Member
Sep 13, 2019
664
2,241
93
Springdale, Ar
Ownership

  1. Talon X
Good morning gentlemen.

Paul, I apologize you are upset about me posting your video. I’m confused though… I was under the impression YouTube was a public web page and has sharable content? Also thought I was helping you out getting you more views, likes, and subscribers?? If I’m not mistaken you even, ask for people to like and subscribe at the end of the video? Also let me point out there is even a “share” button below the video… If you want to limit your video sharing, then I would recommend you removing it from YouTube? Again, I apologize for getting you upset. I guess I was misled being that its on YouTube and has a “share” link. I did give you credit also in my post.



Sspeederr, we had this discussion in the private messaging. Id be more than happy to go over this again. I have been working on mine for about 3 months off and on. Mine was designed using a CMM (coordinate measuring machine). I purchased yours to review it and compare it to mine. I used yours for about 50 miles. This is called a “test buy” (also called a “competitive product analysis”). This is a common practice when you design and produce products you are looking to sell. I evaluated your product mainly to justify the selling price of mine. I needed to have justification if mine was worth more or less than yours. My analyzing showed yours was a little brittle and little unstable on the steering column. Not saying there is anything wrong with yours. You get what you pay for.

Mine has a few different features and looks quite a bit different than yours. Looking at pics, comparing yours to Paul’s yours has a lot more resemblance to each other. Mine has a sun visor, a couple of built in radius’s, and some friction fit guests on the back. I don’t know where you are coming off and saying I copied your design. Again, yours looks very similar to Paul’s who I think was the first to design one…


Fits off, Terry not Paul. I understand how YouTube works. It's not that you posted the video it's that you are using it for personal gain without even a thought of contacting me first. I do these videos to promote and highlight products that I've used and like. Your product is not one of them. Some amount of common courtesy would be appreciated when deliberately using a video that is not about your product to promote your product.
 
Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
17,952
62,637
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5
Good morning gentlemen.

Paul, I apologize you are upset about me posting your video. I’m confused though… I was under the impression YouTube was a public web page and has sharable content? Also thought I was helping you out getting you more views, likes, and subscribers?? If I’m not mistaken you even, ask for people to like and subscribe at the end of the video? Also let me point out there is even a “share” button below the video… If you want to limit your video sharing, then I would recommend you removing it from YouTube? Again, I apologize for getting you upset. I guess I was misled being that its on YouTube and has a “share” link. I did give you credit also in my post.

You need to can this BS right now..

Sent from my SM-G996U using Tapatalk
 
CID

CID

Well-Known Member
Lifetime Member
Supporting Member
Oct 27, 2019
4,975
22,072
113
SE Denver-ish
Ownership

  1. Talon R
Being a retired senior, I’m interested in this magic 3D printing wizardry. And, being a senior, computers don’t come easy to me. :oops:

Can someone explain the smooth surface texture difference between Paul’s (which I purchased) and the rough texture of the one above? I prefer the smooth finished look and wonder if that’s the quality of the printer itself, a printing option or the plastic used?

Sorry this went sideways for you guys. :( I provided tech support for the DR650SE dual sport motorcycle for almost 10 years and had close to 1000 tech photos of that bike. I open sourced those photos but some guys still felt the need to take credit for the pics they used, that REALLY pissed me off. A simple ‘photo thx to CID’ was all I asked (aka ER70S-2).
 
  • Like
Reactions: Lil_Steve
S

Silveradodriver

Guest
CID, there is a lot variables in 3d printing. Speed, heat, plastic properties, etc. The pictures are a little deceiving. That blue is pretty glossy. With the sun light it really shows the layers of the plastic. Makes it look like it could be rough. Here is a pic of one of Paul's. It looks to be about the same as mine.
Paul1
176202959 877106916184353 2044312923802076993 n
 
  • Like
Reactions: CID
TerryH

TerryH

Well-Known Member
Supporting Member
Sep 13, 2019
664
2,241
93
Springdale, Ar
Ownership

  1. Talon X
@Silveradodriver This is where we are now since you are obviously not getting the message from me or any others including @Hondasxs. Either delete my video from your for sale add or I'll delete it from my channel. Either way I'm not going to allow you to profit from it. Is that clear enough?
 
Status
Not open for further replies.
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!