• Welcome to HONDASXS.com

    If you are a guest please take time to REGISTER with us. Stay up to date on the Honda Side by Side line and take part in our online forum. Check out the FAQ. Once you register you can start to make post. Users will respond to your question or statement. To start viewing messages, select the forum that you want to visit below or click the board index to see a list of all forums. Thanks and have fun.

Honda Talon 1000 Accessory Installtion Instructions

Discussion in 'Talon 1000 Accessories and Modifications' started by HondaTech, Mar 17, 2019.

  1. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Posting Talon Accessory Instructions, @Hondasxs feel free to sitcky.

    I've tried to title them for easy ID. Didn't bother with mirrors as I know most people wont spend the money Honda wants for them anyways and its cut and drive on installing them.

    Drop a line if anything is labeled incorrectly or isn't showing up.

    Added winch instructions. Warning, they have a few mistakes.

    5/12/19 Added Skid Plates, Side Skid Plates, Intrusion Bar, Cargo Box and Half Cargo Box
     

    Attached Files:

    #1 HondaTech, Mar 17, 2019
    Last edited: May 12, 2019
    JACKAL, carlsonjmc, DRKnight and 5 others like this.
  2. Cyberjunk

    Cyberjunk Berserker
    Lifetime Member

    Joined:
    May 10, 2017
    Messages:
    1,114
    Likes Received:
    2,505
    Location:
    Crane Hill Alabama
    Ownership:
    700-4
    Heard the seats are not to bad to buy ? Looking at them for my 700 . Any idea on the cost ?


    Sent from my iPhone using Tapatalk
     
    BWAF likes this.
  3. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    I cant remember the exact number but when the parts fiche first released the back and lower cushion weren't too bad, but either they've raised the price or Babbit's is charging a hefty margin.

    Their listing the seat back as $229 and the seat bottom as $165. I cant check prices through I.N until tomorrow. Ill shoot you a PM with the retail that Honda wants for them tomorrow.

    For instance Babbt's wants $4 for a 12mm Drain Plug Washer (94109-12000) when I use to sell them for 99 cents.
     
  4. Hondasxs

    Hondasxs Club Founder
    Staff Member Vendor Lifetime Member Club Contributor

    Joined:
    Feb 13, 2013
    Messages:
    11,241
    Likes Received:
    22,768
    Location:
    Charlotte, NC
    Ownership:
    1000-5
    You rock man.
    Thanks.

    Sent from my SM-G955U using Tapatalk
     
  5. Neohio

    Neohio Beast of the East
    Lifetime Member Supporting Member Club Contributor

    Joined:
    Dec 22, 2016
    Messages:
    7,694
    Likes Received:
    24,918
    Location:
    Painesville Ohio
    Ownership:
    1000-5
    Bad_bowtie, HondaTech and BWAF like this.
  6. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    All this and I just got to see my first Talon in person yesterday @ Indy SX.

    Haven't even got to sit in 1 yet....:(

    Tomorrow cant get here soon enough.
     
    JACKAL, Bad_bowtie and BWAF like this.
  7. Talonpalooza

    Talonpalooza Active Member

    Joined:
    Feb 25, 2019
    Messages:
    116
    Likes Received:
    230
    Location:
    Michigan
    Ownership:
    Talon X
    Thanks for post. This is great! Do you have window washer instructions?
     
  8. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Now that you mention it, those are strangely absent from the list on our dealer site.
     
  9. Talonpalooza

    Talonpalooza Active Member

    Joined:
    Feb 25, 2019
    Messages:
    116
    Likes Received:
    230
    Location:
    Michigan
    Ownership:
    Talon X
    Did Honda ever post installation instructions for wiper kit?
     
  10. Smitty335

    Smitty335 Well-Known Member
    Lifetime Member

    Joined:
    Oct 3, 2016
    Messages:
    11,882
    Likes Received:
    23,549
    Location:
    NWA Arkansas
    Ownership:
    1000-5
    It's too dangerous! Honda lawyers forbid it! HA!
     
  11. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Not yet, but we did get a couple of the kits in.

    No winch instructions yet either.
     
  12. Bigblue1

    Bigblue1 Member

    Joined:
    Feb 3, 2019
    Messages:
    59
    Likes Received:
    75
    Location:
    NC
    Ownership:
    Do not currently own
    Did you ever find the winch instructions?
     
  13. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Sorry for the wait, I'd forgotten about this post tbh, I plan on posting Winch instructions tomorrow.

    Will also post windshield washer as well if its show up yet.

    Look in original post for instructions.
     
    Hondasxs likes this.
  14. Talonpalooza

    Talonpalooza Active Member

    Joined:
    Feb 25, 2019
    Messages:
    116
    Likes Received:
    230
    Location:
    Michigan
    Ownership:
    Talon X
    HondaTech, you seem to know more than my dealer. Thanks for posting this info. Maybe you can answer a question regarding accessory switchplate with volt meter. I have that Honda switchplate accessory and the Honda horn kit and horn. The two pin connector on horn kit does not have same connector as the five switchplate connectors. What are the five switchplate connectors for if not plugging in Honda accessories?
     
  15. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Unless they've changed the horn kit from the P1K, it dies not tie into the switch plate setup.

    The switch plate is for their light bar, windshield wiper, and whatever else. Usually the switches they use have more pins than necessary to operate the accessory.
     
  16. Talonpalooza

    Talonpalooza Active Member

    Joined:
    Feb 25, 2019
    Messages:
    116
    Likes Received:
    230
    Location:
    Michigan
    Ownership:
    Talon X
    If you sense frustration it is not directed at you. If true, shame on you Honda if the Honda Horn kit does not work with your switchplate. Thanks for answering.

    Just so I understand. Honda Talon's rocker switchplate kit supposedly includes convenient connectors made for Honda only accessories (which I understood going in). The HONDA Talon Horn and and HONDA Talon Horn kit HONDA accessory which includes HONDA's wiring harness and HONDA's rocker switch is not made for the HONDA Talon switchplate connectors? You have 5 rocker pin connectors and the horn is going to take one of those 5 slots. So, the horn assembly harness should have the connector to connect to one of those 5 connectors, true? What am I missing? If that horn switch and assembly does not seamlessly connect to the harness why pay $150 for something you can get for $30? The ONLY reason I overpaid was for ease of connection.
     
  17. Reneb3

    Reneb3 Member

    Joined:
    Oct 14, 2017
    Messages:
    42
    Likes Received:
    19
    Location:
    Cross sc
    Ownership:
    1000-3
    I installed the mechanical part of the winch today and attached some pictures since there are no instructions. Remove the bumper with 6 12mm bolts and 4 hex screws. The top hex screws are flanged. I reused all the original mounting hardware. We will see if it’s installed correctly when we get the real instructions. For now it looks like the on line pictures. Tomorrow I will tackle the electrical. You don’t need any of the accessory bumpers. I did order the aluminum one but it won’t be available for a month so the stock will have to do for now. I added the roller and stopper. I did have to buy 4 m8 1.25 flange nuts. I’ll post the electrical tomorrow, unless life gets in the way.

    C0BB1F18-CB05-4ED1-AF19-DE2D7645EF67.jpeg 6E70058F-0A8D-4328-A9CD-858734FF50CA.jpeg 8F511EF6-46BC-48C3-9D22-3D8B9D048E5F.jpeg 3C08D642-8B41-4C10-91E0-0CACDD249059.jpeg ADE5C2EE-3383-4924-BEB9-4DB6E211A43C.jpeg ECB20338-02F3-42E0-A5C5-5CF7C78A5EC9.jpeg
     
    Christepher and Mudwing like this.
  18. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Let me do some digging on what the switch panel and horn entails. The P1K horn I belive had it's own button for placement near the steering wheel. The Talon may be different, I haven't had time to look at much of the accessories. Everyone we've sold so far has left with their stuff still in boxes or with none at all.
     
  19. HondaTech

    HondaTech Working For Mother Honda!!
    Lifetime Member Club Contributor

    Joined:
    Dec 30, 2015
    Messages:
    1,172
    Likes Received:
    2,555
    Winch Instructions still not available.
     
  20. Smitty335

    Smitty335 Well-Known Member
    Lifetime Member

    Joined:
    Oct 3, 2016
    Messages:
    11,882
    Likes Received:
    23,549
    Location:
    NWA Arkansas
    Ownership:
    1000-5
    Well that explains it all! Why the Talon took so long to be released, Geeks trying to write install instructions for the Honda only mods! HA!
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice
Loading...