BOX1

P500 Honda Windshield trim

M

MarkAlan

New Member
Dec 10, 2019
28
21
3
Huntsville, AL
Ownership

  1. 500
Has anyone made a small cut to a windshield? I added some pod lights to the front ROP down as close to the hood as possible. The mounts will not let the windshield close all the way leaving a small gap at the bottom. I could always shave the mounts down, but shaving the windshield would be easier and faster if it wont damage it. This would be down at the bottom corners where the gasket is installed that meets the hood.
 
M

MarkAlan

New Member
Dec 10, 2019
28
21
3
Huntsville, AL
Ownership

  1. 500
I was worried about damage to the windshield, such as cracking or something crazy.
 
M

MarkAlan

New Member
Dec 10, 2019
28
21
3
Huntsville, AL
Ownership

  1. 500
Hey Trigger, I have installed the WE shocks, and removed the rear sway bar. I ride in rocky slick mountain terrain and I must say its like having a new machine. I have the shocks set on 3 from the softest and it just hugs the ground now. It works much like my old TJ Wrangler.
 
  • Like
Reactions: trigger
trigger

trigger

Old Ironsides
Vendor
Lifetime Member
Supporting Member
Feb 13, 2016
20,470
150,979
113
Bay City, Michigan
www.quickshieldutv.com
Ownership

  1. 500
I was worried about damage to the windshield, such as cracking or something crazy.

I mounted led pods in my half shield. Had to cut the holes so I drilled a hole in each corner. Nice sharp bit, take it slow and make sure there's something behind it. I used a 2x6. Then I cut with one of those small paddle type saws, like a reciprocator. Got it from HF for like $15.
Yeah, WE's are the sh**!
 
M

MarkAlan

New Member
Dec 10, 2019
28
21
3
Huntsville, AL
Ownership

  1. 500
I have one of those, I also might try a grinder. It just needs a small amount off each side and it will be golden.
 
  • Like
Reactions: trigger
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!