P1000m3 Introduction from Nevada

[Horse]

Hi all, I picked up a 2022 P1000 Deluxe back in September, and have since been absorbing valuable information from the forum. I purchased the machine for utility work around our horse property plus additional use hunting and exploring nearby BLM trails. There is literally a OHV trailhead about 1.5 miles from the house. I've since installed the dual battery kit from the Club Store, a Viper V2 4500 Winch, auto backup light kit, Turn Pro signal system with trailer harness, new combination of switches utilizing the factory switches/spaces, and 3D Crossroads switch panel. I'll probably create a separate thread detailing my spin on the accessory wiring and lighting that I utilized. I've also installed full Factory UTV skid plates, a Kolpin steel roof, Kolpin glass windshield, and Garmin Honda Tread GPS. Here are a series of photos from the day I picked up the machine, including surprising the kids when they unknowingly looked in the hay shed, to how she sits now. I'll also be installing a HAM radio and OEM soft rear panel this week, and still deciding on side doors and shock selection. More to come!

 

[Admin]

 

[SILVER_ALERT]

Howdy from Oklahoma and welcome to the club. Looks like the kids give it their approval.

 

[Backwoods]

Nice buggy. It sounds like you’re off to a real good start
Welcome from west Ga
# NTC

 

[Todd627]

Welcome from The Great Lakes State (not to be confused as a great state though).

Good lookin’ buggy.

#NTC

 

[Smittyp]

Welcome from Tennessee

 

[pappyo]

1st.
WELCOME from central upstate N.Y.
Many good people on the Honda forum AND they LIKE PICTURES. ( thanks for providing the pictures )

Good times will be had.

Enjoy the New Toy.

 

[Rdrcr]

Congrats and welcome from Washington state!

Mike

 

[Remington]

Garmin Honda Tread GPS.

Welcome from Commie Run Michigan!

Nice rig! GO ARMY Green!

got any pics of that GPS? Also how do u like it?

 

[CID]

Welcome from the once great state of Colorado. 😎

 

[Horse]

Welcome from Commie Run Michigan!

Nice rig! GO ARMY Green!

got any pics of that GPS? Also how do u like it?

I haven't had a chance to really test out the GPS on a ride or play around with it much. During install the Tread App on my phone seemed a little glitchy, but seems to be working now. The GPS unit itself seamlessly performed software/map updates over WiFi, and I like the display and interface so far. I have the Honda power harness for it which splits off the accessory 12v outlet from the lower dash, so the GPS powers on automatically with key-on power, and performs shutdown sequence after power loss.

Also, full disclosure I kind of got tricked into this particular purchase. I had been searching for the Honda accessory part number 0SS50-HL4-A00 from their 2022 Accessory listing, which from the marketing appeared to be the Group Ride Radio version of the GPS. I found this part number for sale from Partzilla.com for $648 which I thought was a screaming deal compared to the more common $799 list price for the Group Ride Version. Turns out the Honda part number version includes the Group Ride Radio mount and antenna but no hand mic, go figure 😒. So anyway I was kind of pissed and only discovered this after fully installing the power wiring. It appears that this unit as configured will transmit and receive rider locations for those using Group Ride, just no voice communication unless the hand mic or maybe a Bluetooth headset is used. I was honestly leaning toward the Base Tread model without Group Ride Radio, and do like the powered mount that I now have. Plus now there's a Honda wings emblem on the screen startup because it was a Honda edition Garmin! 🤘

 

[Rayger143]

Welcome from BC. Sweet ride you have. Congrats

 

[Buggyman]

Hi all, I picked up a 2022 P1000 Deluxe back in September, and have since been absorbing valuable information from the forum. I purchased the machine for utility work around our horse property plus additional use hunting and exploring nearby BLM trails. There is literally a OHV trailhead about 1.5 miles from the house. I've since installed the dual battery kit from the Club Store, a Viper V2 4500 Winch, auto backup light kit, Turn Pro signal system with trailer harness, new combination of switches utilizing the factory switches/spaces, and 3D Crossroads switch panel. I'll probably create a separate thread detailing my spin on the accessory wiring and lighting that I utilized. I've also installed full Factory UTV skid plates, a Kolpin steel roof, Kolpin glass windshield, and Garmin Honda Tread GPS. Here are a series of photos from the day I picked up the machine, including surprising the kids when they unknowingly looked in the hay shed, to how she sits now. I'll also be installing a HAM radio and OEM soft rear panel this week, and still deciding on side doors and shock selection. More to come!

View attachment 367866 View attachment 367867 View attachment 367868 View attachment 367869 View attachment 367870 View attachment 367871 View attachment 367872 View attachment 367873 View attachment 367874

welcome from Ohio. nice looking buggy. looks like a couple of happy kids

 

[1border4manu]

Welcome from Central Florida. Congratulations on your new machine. Looking good.

 

[BadMechanic]

Nice ride. Love the color.

Welcome from NY

Sent from my SM-A326U using Tapatalk

 

[DaddyDubbs]

Welcome from Alabama

 

[Mopower58]

Welcome from Mississippi. Nice!
#NTC

 

[GovtMule]

Welcome from TN. Good color!

 

[Bama-Daniel]

Welcome from North Alabama!

 

[Prntckt]

Nice rig!
Welcome to the forum from west central Wisconsin.

 

[Farmer]

Welcome to the club!