ISO Talon X parts

H

HondaTech

Guest
Need entire front suspension off Talon x. Color doesn't matter, scratches ok, just not bent obviously.

Shocks, arms, tie rods, steering box, axles, brake hoses, etc.

Don't need hubs, spindles, brake calipers, anything thats shared with an R.
 
NTCPrezJB

NTCPrezJB

President of #NTC
Lifetime Member
Supporting Member
Jan 30, 2018
99,665
891,483
113
Canton, OH
Ownership

  1. 1000-5
Need entire front suspension off Talon x. Color doesn't matter, scratches ok, just not bent obviously.

Shocks, arms, tie rods, steering box, axles, brake hoses, etc.

Don't need hubs, spindles, brake calipers, anything thats shared with an R.
Your GM have an issue at the race last weekend?
 
  • Like
Reactions: Isaiah and CID
H

HondaTech

Guest
Your GM have an issue at the race last weekend?

After this past weekends incident (their will be a video shortly) we've since discussed options with several different people.

The best option appears to be to narrow the car as much as possible make it more maneuverable.

The rear isn't really an issue, we're just going to remove the wheel spacers.

The front is a different story, it appears the only way is to go with X suspension and the lowest offset wheel possible. He doenst want to hack up what he has, seeing as the front Raceco arms alone were almost $1500.

The X and R share the same axle cups, its just a longer shaft. But he'd rather not have to break down his stuff, incase he wants to increase the width for trail riding.
 
Cuoutdoors

Cuoutdoors

Executive Member
Lifetime Member
Sep 12, 2016
4,229
15,539
113
Central Iowa
Ownership

  1. 1000-3
After this past weekends incident (their will be a video shortly) we've since discussed options with several different people.

The best option appears to be to narrow the car as much as possible make it more maneuverable.

The rear isn't really an issue, we're just going to remove the wheel spacers.

The front is a different story, it appears the only way is to go with X suspension and the lowest offset wheel possible. He doenst want to hack up what he has, seeing as the front Raceco arms alone were almost $1500.

The X and R share the same axle cups, its just a longer shaft. But he'd rather not have to break down his stuff, incase he wants to increase the width for trail riding.

Where was he racing?
 
  • Like
Reactions: Isaiah
Razorback

Razorback

Well-Known Member
Lifetime Member
Aug 23, 2015
397
999
93
Van Buren, AR
Ownership

  1. Talon X
Need entire front suspension off Talon x. Color doesn't matter, scratches ok, just not bent obviously.

Shocks, arms, tie rods, steering box, axles, brake hoses, etc.

Don't need hubs, spindles, brake calipers, anything thats shared with an R.
I have a post for X upper and lower a arms
 
  • Like
Reactions: Isaiah

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!