Multi ITP Blackwater EVOs new sizes

[joeymt33]

I was just checking out the two new sizes. I find it interesting that the 32" Evo is only 3 lbs heavier vs the 30". Also, how can the Mayhems be 54lbs in 32"? I know there's a 1" difference in tire size but that's crazy.

 

[joeymt33]

I may need to buy one and see if it's a true 30" tire. If so, that would be great. At 36lbs, that's not bad.

 

[scott]

not true to size.


Sent from my iPhone using Tapatalk

 

[joeymt33]

not true to size.


Sent from my iPhone using Tapatalk

I know from experience. I've had multiple sets. I hope I can get these and they will be 30". If they are any higher, I won't like them.

My 30" EVOs were 28" tall. This pic shows 30" EVOs next to 30" roctanes.



I contacted ITP and they told me they are true 30" at 32psi!!! That's crazy as I usually run 8-10 psi.

 

[scott]

32 psi in a utv tire that sounds crazy


Sent from my iPhone using Tapatalk

 

[joeymt33]

32 psi in a utv tire that sounds crazy


Sent from my iPhone using Tapatalk

That was very disappointing to hear them say.

 

[Tflynn]

32psi? Jeez what do they do, seat the bead then measure them? Can't imagine running that kind of pressure.

 

[Delton]

I think I'll just get 28" next set. No sense in paying more for something that isn't there. Like 2" lol.

 

[BigCypress73]

does anyone know the true size of the 32" BW yet?

 

[BigCypress73]

Im thinking about getting the 32" BW if they run close to 30", but Im not sure what effect the 15" wheels and 30" tires will have on clutch. Im not worried about clearance. Is this to big??

 

[Sjc3081]

A true 28” tire mounted front on stock wheels or 5+2 wheels are the max height you can clear without rub, full lock in reverse.

 

[William]

So what does a 28” evo measure to at 10 psi?

 

[Adam490]

So what does a 28” evo measure to at 10 psi?

I can measure when I get home this evening

 

[Adam490]

I can measure when I get home this evening

They measure 27.5" at 10 psi

 

[William]

They measure 27.5" at 10 psi

Is that floor to top off tire or no weight on the tire?

 

[Adam490]

That's floor to top of tire with full weight of bike on it

 

[William]

That's floor to top of tire with full weight of bike on it

I bet they are true 28 then... with no weight that is... Thanks.

 

[Adam490]

I bet they are true 28 then... with no weight that is... Thanks.

Yep, I think they measured 28.5 at 32 psi. I left them like that over night then brought them back down to 10. They were right at 28 but lost another 1/2" once they settled.