P700 LED Replacement Bulbs? Pioneer 700-4

[Csharp2323]

What LED bulbs do you guys recommend for replacing the stock halogen bulbs? I have a 700-4. Thanks

 

[Admin]

 

[Glock21user]

Try the search function, this has been discussed many times.

 

[1950Willys]

I have tried several different ones. They all have a whiter appearance than stock but most will not illuminate as far as the stock halogens. Also you have to be careful they fit good and snug as they are known to leak when subject to heavy water running.

I finally went with afermarket led's like the 1000 deluxes. I gained hi and low beam and they really improve pattern and distance lighting.

 

[trigger]

JDMaster 881's. Plug and play. Not any brighter but they're whiter to match light bars and cubes.

 

[Remington]

Try the search function, this has been discussed many times.

And still has marks where the jockey was hittin!

 

[Glock21user]

The other issue is that

And still has marks where the jockey was hittin!

Can confirm

 

[Buckshot07]

 

[livefromthetree]

I love the Starks that @Buckshot07 posted. They are much brighter than the factory lamps were. I have a 12" light bar in the front grill and almost never use it because the starks are about the same brightness.

Here's 3 pics showing starks by themselves, 12" LED bar by itself and finally both on together

 

[ClickInTheBox]

I love the Starks that @Buckshot07 posted. They are much brighter than the factory lamps were. I have a 12" light bar in the front grill and almost never use it because the starks are about the same brightness.

Here's 3 pics showing starks by themselves, 12" LED bar by itself and finally both on together

View attachment 300633


View attachment 300631
View attachment 300632

Did you have to add a resistor or anything?

 

[livefromthetree]

Did you have to add a resistor or anything?

No, plug and play

 

[KevP700-4]

Try these. No fans to clog. No resistors required.

Stark NS 880/881 are not fan cooled. They fit perfect in the 700. Run about $40 for a pair. They have very good white light output, not blueish. Fit very well inside light fixture dust cap, no modifications needed. No light bar needed on our 700-4D.

Amazon.com: Stark Industries 880/881/893/899 NS Series [UPGRADED] 80W LED Headlights Conversion Kit 6000K White IP68 Waterproof : Automotive​

Buy Stark Industries 880/881/893/899 NS Series [UPGRADED] 80W LED Headlights Conversion Kit 6000K White IP68 Waterproof: Headlight & Tail Light Conversion Kits - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com

 

[Mudwisel]

Stark industries. Everything the previous posters have commented on are spot on

 

[Blueridgesxs]

The link for these are dead? I can’t find any on Amazon that match. Does anyone know where I can find these?

 

[NewHere2]

Just punch in Stark 880 in the Amazon search bar.

 

[Tom_C]

I used these in my P500. They fit inside the light enclosure and you can still put the cap on.

https://www.amazon.com/gp/product/B00NJ9MZH0/?tag=sxsweb24-20

I also have LED bars on the hood and roof, and these lights are anemic compared to them, but they are better than stock.

 

[Backwoods]

Just punch in Stark 880 in the Amazon search bar.

I had those in my 700. Were a good bit better than stock