Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
Welcome from the the same State your from !👌
Where bouts you from? I live in the Stockbridge area. I ride mostly at my cabin in the Gaylord area.
these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20
Where bouts you from? I live in the Stockbridge area. I ride mostly at my cabin in the Gaylord area.
these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20
Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
Here’s a close up that I could get for your. The rubber grommets are used for multiple ROPS and work will all the dimensions of the pioneer
Just bought 4 of these below and will install this weekend for some rear lights. Will post any issues but expect none due to the grommets. I believe many ROPS are 1.75' while the Honda is 1.78" Never measured both but have seen this while researching spare tire mounts. Please post corrections if found.
these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20
[/QUOTE]
these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20
[/QUOTE]
C
I live in Fowlerville, do most of my riding in St. Helen or out at the sand dunes.
C
Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
They do work well. But to get the clamps to make a secure fit, they go on very tight and the rubber when putting it on will make it few like it’s too small. That’s what u want tho!
If your still having issues, post some pics as to how it looks so we can help
C
This is the set I bought... Everything looks the same except it is a four piece set...
Amazon.com: Nilight 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty: Automotive
Buy Nilight 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty: Light Bars - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
C
Got it with these... Hard to do by yourself lol. Thanks for the help fellas!
Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
There you go! There a bit of a bugger but you’ll be glad they go on tight when the machine is herky jerkying around on the trail.
Just get the bolts started a few threads at a time and turn the bolts a few revolutions each back and forth so there even to get a good tight fit
Just get the bolts started a few threads at a time and turn the bolts a few revolutions each back and forth so there even to get a good tight fit
[/QUOTE]
I installed these and found the rubber fillers for 1.75 were too large. I took a dreamer and sanded the inner ridges down a bit to make them fit. I also used a clamp th get the two sides close enough to enable the screw threads. If the clamps fall off I’m sure they will need to collect my boday as they are very secure. Mounting on the top back pipe they do touch the roof so find the least amount of roofline to install. You can see that in the pictures.
Similar threads
