New from SW Mississippi

[Gohonda2]

Hello. Have been doing a lot of reading since joining. Learned a lot about my machines. I have a 2020 p500 and a 21 talon r. I have the p500 set up about how I want it with front/rear windshields, roof, 27x7.5 interco interforce tires on factory wheels with spacers, tractor supply 3500# winch, led lights, rear drop basket rack, and lots of diy under seat insulation. Still working on the talon but so far it has rhino axles all around and 33x10 system 3 xt400 tires on factory rims, weller rear tender springs and main springs, and front/rear windshields. I have a harbor freight 5000# winch, lower doors, and a spare tire on hand that I haven’t gotten around to installing yet. Planning to purchase skid plate, some extra lights, front springs, rear bumper with hitch, heat insulation, under hood storage, and possibly dual battery setup. Thanks for looking.

 

[Admin]

 

[Miversluis]

Welcome from Michigan

 

[Buggyman]

Hello. Have been doing a lot of reading since joining. Learned a lot about my machines. I have a 2020 p500 and a 21 talon r. I have the p500 set up about how I want it with front/rear windshields, roof, 27x7.5 interco interforce tires on factory wheels with spacers, tractor supply 3500# winch, led lights, rear drop basket rack, and lots of diy under seat insulation. Still working on the talon but so far it has rhino axles all around and 33x10 system 3 xt400 tires on factory rims, weller rear tender springs and main springs, and front/rear windshields. I have a harbor freight 5000# winch, lower doors, and a spare tire on hand that I haven’t gotten around to installing yet. Planning to purchase skid plate, some extra lights, front springs, rear bumper with hitch, heat insulation, under hood storage, and possibly dual battery setup. Thanks for looking. View attachment 345250View attachment 345254

Welcome from Ohio

 

[Mopower58]

Welcome from CS Mississippi. Nice looking pair of rides. I like the two white Rams in the pic too!
#NTC

 

[1border4manu]

Welcome from Central Florida, nice couple of machines.

 

[Backwoods]

Welcome from west GA
#NTC

 

[Todd627]

Another welcome from The Great Lakes State.

Both good lookin' rigs!!

#NTC

 

[SILVER_ALERT]

Howdy from Oklahoma and welcome to the club.

 

[Remington]

Hello. Have been doing a lot of reading since joining. Learned a lot about my machines. I have a 2020 p500 and a 21 talon r. I have the p500 set up about how I want it with front/rear windshields, roof, 27x7.5 interco interforce tires on factory wheels with spacers, tractor supply 3500# winch, led lights, rear drop basket rack, and lots of diy under seat insulation. Still working on the talon but so far it has rhino axles all around and 33x10 system 3 xt400 tires on factory rims, weller rear tender springs and main springs, and front/rear windshields. I have a harbor freight 5000# winch, lower doors, and a spare tire on hand that I haven’t gotten around to installing yet. Planning to purchase skid plate, some extra lights, front springs, rear bumper with hitch, heat insulation, under hood storage, and possibly dual battery setup. Thanks for looking. View attachment 345250View attachment 345254

Welcome From Michigan!

nice rigs u have there!

 

[Remington]

Welcome from CS Mississippi. Nice looking pair of rides. I like the two white Rams in the pic too!
#NTC

One is a Nice Ford. But Ill give u a pass on that buddy

 

[Smittyp]

Welcome from Tennessee

 

[HiFive]

Welcome from west central fl. Look at those tires on your p500!!!😲

 

[Prntckt]

Welcome to the forum from west central Wisconsin. Nice rigs!

 

[Red500]

Welcome to the club from East Tennessee.

 

[DaddyDubbs]

Welcome from Alabama.

 

[Haldog77]

Welcome from west GA
#NTC

BW did you see two white Rams in the back ground?

#NTC

 

[Haldog77]

Hello. Have been doing a lot of reading since joining. Learned a lot about my machines. I have a 2020 p500 and a 21 talon r. I have the p500 set up about how I want it with front/rear windshields, roof, 27x7.5 interco interforce tires on factory wheels with spacers, tractor supply 3500# winch, led lights, rear drop basket rack, and lots of diy under seat insulation. Still working on the talon but so far it has rhino axles all around and 33x10 system 3 xt400 tires on factory rims, weller rear tender springs and main springs, and front/rear windshields. I have a harbor freight 5000# winch, lower doors, and a spare tire on hand that I haven’t gotten around to installing yet. Planning to purchase skid plate, some extra lights, front springs, rear bumper with hitch, heat insulation, under hood storage, and possibly dual battery setup. Thanks for looking. View attachment 345250View attachment 345254

Welcome neighbor from NW Louisiana.

#NTC

 

[donia]

Welcome from just up the road a piece!

 

[SaltwaterSlick]

Oh lawdy, you mus' have som o that Mississippi mud round your parts!! Those tires are somethin'!! Very nice looking rigs!! They'd fit right in here ins Southeast Texas's pineywoods!!
Welcome to one of the most addicting forum groups I ever did stumble across!!

 

[ProudDadOf5]

Welcome to the club from WV!!