Multi P500/700/1000 Switch Panels-2018 Thread

[mystic1219]

I'm making a new thread again this year to keep up with some changes. Here is last years thread with some good pics and info Multi - Custom Switch Panels (2017 thread)

I am still making custom switch panels for all year and size Pioneers. The shop has changed my ordering requirements some so I am going to try to keep several options in stock for each model that will cover most peoples needs. There will be an extra charge as well as a waiting time for custom orders. If you need something other than what I have in stock please PM me to discuss.
The panels are laser cut to the exact dimensions of your factory warning label on the dash. You will drill the rivets, peel that label and then mount the panel in its place. I prefer to use a razor knife and cut out only what is needed for the switches and accessories, but there are plenty of people who chose to just make one large cutout. They are steel and I powder coat them to match the dash. Several customers have spray painted over them to match their Pioneer's color and the results look very good.

*A note on 2017+ P700 models. There is a brace behind the dash that interferes with switches and accessories when installed. I am currently revising my panels to adjust for this. It is going to limit the area we have to work with on the panel.

The price is $30 shipped for any of them that I keep in stock.

Thanks for looking! Feel free to ask questions, or share your pictures and install/setup suggestions

 

[sc700]

how are the new ones for the 700 coming? estimated time frame, looking forward to finally hook up my accessories.

 

[mystic1219]

how are the new ones for the 700 coming? estimated time frame, looking forward to finally hook up my accessories.

Hey SC,

I drew up a couple new layouts and ordered several of each to run through production. I'm waiting for my order to be cut and painted but anticipate sometime this week or next week should be the latest.

 

[sc700]

Awesome, look forward to it.

 

[Mopower58]

Can you make a switch panel similar to the Honda 4 switch with a round hole for the volt meter? It covers the cubby hole up below the warning label on a 2016 P1K-3. I would like it to have 5 switch cutouts with the far right one having your dual battery readout installed. Thanks.

 

[rubicon05]

I would probably buy one of these as well if it helps building 1.

 

[Mopower58]

I would probably buy one of these as well if it helps building 1.

He sent me a message on Facebook and said he was too busy at the moment, 6-7 13 hr. Days. Said he might do them later because these plates are his side job and if he does I will let you know.

 

[RutNBull]

Good morning. Could you please send info on 500 switch plates. Just joined forum and new to using. Thanks. RutNBull

 

[mkc809]

Hey mystic, you still got those tailgate brackets for 2017 P700-4


Sent from my iPhone using Tapatalk

 

[aprils_fool]

Pm sent

Sent from my SM-G930P using Tapatalk

 

[906UP]

Pm sent

Sent from my SM-G930P using Tapatalk

What are you adding.....?

 

[aprils_fool]

Well obviously some switches

Sent from my SM-G930P using Tapatalk

 

[aprils_fool]

Ill send ya a message

Sent from my SM-G930P using Tapatalk

 

[Eaglecampground]

Looking for a panel on a 2016 700-4, thanks in advance!!!

 

[Erick]

I'm making a new thread again this year to keep up with some changes. Here is last years thread with some good pics and info Multi - Custom Switch Panels (2017 thread)

I am still making custom switch panels for all year and size Pioneers. The shop has changed my ordering requirements some so I am going to try to keep several options in stock for each model that will cover most peoples needs. There will be an extra charge as well as a waiting time for custom orders. If you need something other than what I have in stock please PM me to discuss.
The panels are laser cut to the exact dimensions of your factory warning label on the dash. You will drill the rivets, peel that label and then mount the panel in its place. I prefer to use a razor knife and cut out only what is needed for the switches and accessories, but there are plenty of people who chose to just make one large cutout. They are steel and I powder coat them to match the dash. Several customers have spray painted over them to match their Pioneer's color and the results look very good.

*A note on 2017+ P700 models. There is a brace behind the dash that interferes with switches and accessories when installed. I am currently revising my panels to adjust for this. I-5 t is going to limit the area we have to work with on the panel.

The price is $30 shipped for any of them that I keep in stock.

Thanks for looking! Feel free to ask questions, or share your pictures and install/setup suggestions

View attachment 65478 View attachment 65479 View attachment 65480 View attachment 65481 View attachment 65482 View attachment 65483

I did send you an email asking about the switch panels. I could use a panel for a 2016 P1000 deluxe that would accomodate 4-6 otrattw switches. I got one from you before and it worked perfectly. Hope you still have them and how do I order one?

Thanks

 

[Erick]

I'm making a new thread again this year to keep up with some changes. Here is last years thread with some good pics and info Multi - Custom Switch Panels (2017 thread)

I am still making custom switch panels for all year and size Pioneers. The shop has changed my ordering requirements some so I am going to try to keep several options in stock for each model that will cover most peoples needs. There will be an extra charge as well as a waiting time for custom orders. If you need something other than what I have in stock please PM me to discuss.
The panels are laser cut to the exact dimensions of your factory warning label on the dash. You will drill the rivets, peel that label and then mount the panel in its place. I prefer to use a razor knife and cut out only what is needed for the switches and accessories, but there are plenty of people who chose to just make one large cutout. They are steel and I powder coat them to match the dash. Several customers have spray painted over them to match their Pioneer's color and the results look very good.

*A note on 2017+ P700 models. There is a brace behind the dash that interferes with switches and accessories when installed. I am currently revising my panels to adjust for this. It is going to limit the area we have to work with on the panel.

The price is $30 shipped for any of them that I keep in stock.

Thanks for looking! Feel free to ask questions, or share your pictures and install/setup suggestions

View attachment 65478 View attachment 65479 View attachment 65480 View attachment 65481 View attachment 65482 View attachment 65483

I'm making a new thread again this year to keep up with some changes. Here is last years thread with some good pics and info Multi - Custom Switch Panels (2017 thread)

I am still making custom switch panels for all year and size Pioneers. The shop has changed my ordering requirements some so I am going to try to keep several options in stock for each model that will cover most peoples needs. There will be an extra charge as well as a waiting time for custom orders. If you need something other than what I have in stock please PM me to discuss.
The panels are laser cut to the exact dimensions of your factory warning label on the dash. You will drill the rivets, peel that label and then mount the panel in its place. I prefer to use a razor knife and cut out only what is needed for the switches and accessories, but there are plenty of people who chose to just make one large cutout. They are steel and I powder coat them to match the dash. Several customers have spray painted over them to match their Pioneer's color and the results look very good.

*A note on 2017+ P700 models. There is a brace behind the dash that interferes with switches and accessories when installed. I am currently revising my panels to adjust for this. It is going to limit the area we have to work with on the panel.

The price is $30 shipped for any of them that I keep in stock.

Thanks for looking! Feel free to ask questions, or share your pictures and install/setup suggestions

View attachment 65478 View attachment 65479 View attachment 65480 View attachment 65481 View attachment 65482 View attachment 65483

I am interested in a 6-switch panel. Just wondering if you are still making these. Please let me know.

 

[Tramguage1]

He still makes them. He does this on the side, he will get back to you guys. Try sending him a PM. Touch you avatar top right of page , then start a conversation by touching the envelope

 

[djracer]

Hey Mystic I want a plate like the last one in the 2017 thread. 8 switch two round holes and ram mount. I have a 2016 1000/5. I also want a set oF tailgate brackets.

 

[Muleyhunter]

@mystic1219 I sent you a PM. Are you still making these panel? If so, I would like to order one

 

[Brooksie]

@mystic1219 Are you still making these panels for a 700. I would like to get one. 4-switch panel w/hole for voltmeter. switches on right side due to brace on back side of dash. For a 2018 Pioneer 700-2.
P.S new to hondasxs
Thanks Dan