P1000 Portals

[Leeshoe82]

I just ordered 4inch portals. I have cfab lift. I was just wondering what size tires I could fit under it?

 

[Admin]

 

[Nruis89]

I just ordered 4inch portals. I have cfab lift. I was just wondering what size tires I could fit under it?

I’m wondering as well I wanna go with the 6inch portals in the future.

 

[Adam490]

@aauman88 can probably shed some light on this for you; he's got a nice mud/trail rig. Don't think there are many others on the forum that run the portal setup.

 

[Nruis89]

@aauman88 can probably shed some light on this for you; he's got a nice mud/trail rig. Don't think there are many others on the forum that run the portal setup.

Yeah as much as I hate to I think I’m going to get back on Facebook Bc I think the pioneer forums on there are more active.

 

[Adam490]

Yeah as much as I hate to I think I’m going to get back on Facebook Bc I think the pioneer forums on there are more active.

It's the same s*** over and over. If that's what you mean by active, anyway. Go take a look at @aauman88 build thread:

P1000 - My 1000-5 After one year

Have had the Honda for a month this week. It’s a 2016 1000-5 Deluxe with HL 2.5” lift and 28x10” Outback Max tires with 1.5” spacers in rear. Added bilge fans under seat and 60mil heat shield from front of bottom seat to top of front seat back with switch in glove box for fans. Dual battery...

hondasxs.com

 

[Adam490]

@DDDonkey runs a portal setup on 35's I believe as well so he may be able to chime in.

 

[aauman88]

35’s will scrub slightly with CFab and 4” portals. TTC 3” lift and 4” portals will clear 38’s. Here is TTC 3” and 6” portals with 40’s

 

[Nruis89]

my

35’s will scrub slightly with CFab and 4” portals. TTC 3” lift and 4” portals will clear 38’s. Here is TTC 3” and 6” portals with 40’s

View attachment 260006 View attachment 260007 View attachment 260008 View attachment 260009 View attachment 260010

when did you get the 6s. I’m guessing 45%. How’s the power. I’m scared it won’t be enough for wide 35 bkts.

 

[aauman88]

My 38’s were wide BKT’s and my 40’s are 10.5” wide. Yes I have 45% now but the 30% did great with 38’s but mine is tuned

 

[DDDonkey]

My first set up with portals was the SATV front/rear a-arms with 814 shocks, and 35s and I rubbed at full lock and at full compression. I now run TTC front a-arms with no lift and SATV rear a-arms and have no issues at all with rubbing. I am running the system 3 XCR 350 tires so they are the more squared off version.


If you would like I can take a picture of my old bulk head to show you where I rubbed, it was at the very out side edge.

Portals were the most fun mod I have done to date and I live in the desert. Also @SuperATV stands behind their portals, I put a hole in one and they covered it no questions asked and sent me a new portal the same week they received the old one. The new portal included the seal, and bearings which I figured I would have to cover but didn't.

 

[aauman88]

Portals is by far the first mod I’d do again if I built another

 

[Nruis89]

Portals is by far the first mod I’d do again if I built another

I already have a the Florida cracker custom tune. Do you still have your satv arms you’d wanna sell? I don’t wanna spend that much on the ttc arms.

 

[aauman88]

I already have a the Florida cracker custom tune. Do you still have your satv arms you’d wanna sell? I don’t wanna spend that much on the ttc arms.

No sold them when I went TTC

 

[SuperATV]

🤘😎

 

[SouthernOutlaw00]

So if I'm reading this correctly, with SATV front and rear arms and 6" portals, my 35x8.5x22 Motohavoks on 22x7 wheels will possibly fit without rubbing up front? Seems the extra 2" of portal should help the minor rubbing that DDDonkey experienced if I'm thinking straight, unless he had 6" and then I'm screwed. Any idea what the top speed would possibly look like with that setup and a 30% reduction? I have a 21 Limited, so I'm "Limited" as to what I can do lift wise. This will be my first set of portals on my first side by side, so I'm just trying to get some more info on it from a previous owner's standpoint. Thanks!

 

[DDDonkey]

I have 4” portals with the 30% reduction and 34.5” tall tires ( true size) and top speed is 59 mph with the gps.

 

[SouthernOutlaw00]

That’s awesome! I’m running in that general area now with 28’s and a full windshield, so it sounds like I’ll be pretty close to stock speeds after the build. I really appreciate it!

 

[Leeshoe82]

35’s will scrub slightly with CFab and 4” portals. TTC 3” lift and 4” portals will clear 38’s. Here is TTC 3” and 6” portals with 40’s

View attachment 260006 View attachment 260007 View attachment 260008 View attachment 260009 View attachment 260010

Nice setup man. I put 31s on mine for now just to see how it handles

 

[JFRO]

I run 6" Outcast lift and 6" SATV portals with 45" Motohavocs, they rub in the front when I put it in a bind and turn. 35's should be no problem.

 

[JFRO]

I wish SATV would hurry up and make some 8" portals with 60% gr.