trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
Mudder
NTC Ambassador of Walls
Lifetime Member
Yep, takeover took its toll on many. And it kept the “Never Done” mods motto alive and well..ummm Locker!Isn't that the same one that @JSPEED ripped off the back of his at the takeover?
GRANITE
People Dying to come see me!
Lifetime Member
Supporting Member
GRANITE
People Dying to come see me!
Lifetime Member
Supporting Member
Isn't that the same one that @JSPEED ripped off the back of his at the takeover?
I got mine from Harbor Freight but I believe they are all the same thing, no matter what store sells them. I THINK what really tore mine up is my Polaris cooler kept sliding side to side and eventually ripping the sides off but still, it shouldn't have. Dam Polaris!
Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
Around 250$
I like your new hood decal! BA
U
I also used the Northerntool carrier, just moved it back some so I could mount my 5 gallon Jerry can too.
I just did 100 miles of rocky trails and both 5 gallon Jerry can and spare tire mount (aka dragonfire mount off of EBay) worked very well. Highly recommend the spare tire mount. I did have to add a piece of rubber from an old tire b/c our roll cage on the P5 is more like 1.6” than 1.78” but it worked great. I mounted the dragonfire arm to the top horizontal piece of the rollcage.
View attachment 80179
View attachment 80180View attachment 80181
View attachment 80182View attachment 80183
This is the EBay listing I bought the arm from, very well laid out including bolt pattern. I believe the lugs nuts he supplies are 14mm so I carry an extra wrench...
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/232673363931
Sent from my iPhone using Tapatalk
I just did 100 miles of rocky trails and both 5 gallon Jerry can and spare tire mount (aka dragonfire mount off of EBay) worked very well. Highly recommend the spare tire mount. I did have to add a piece of rubber from an old tire b/c our roll cage on the P5 is more like 1.6” than 1.78” but it worked great. I mounted the dragonfire arm to the top horizontal piece of the rollcage.
View attachment 80179
View attachment 80180View attachment 80181
View attachment 80182View attachment 80183
This is the EBay listing I bought the arm from, very well laid out including bolt pattern. I believe the lugs nuts he supplies are 14mm so I carry an extra wrench...
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/232673363931
Sent from my iPhone using Tapatalk
I got a cargo tray for around the yard and a box for out on the trails , easily swapped out thanks to quick clamps
A box that seems to be available in NZ only.
Smitty335
Well-Known Member
Lifetime Member
Supporting Member
C
trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
switched out my Yamaha golf cart bed for a Landmaster Utility Poly bed.
C
trigger
Old Ironsides
Vendor
Lifetime Member
Supporting Member
Nice looking rig. I can vouch that it really happened now.
Btw, it's known that the green ones go deeper.
Smitty335
Well-Known Member
Lifetime Member
Supporting Member
P
PNWGuy
Guest
G
Did a quick addition to me rear rack before heading south tomorrow. Little extra fuel capacity just for peace of mind. Or for my buddy in his rzr when it runs low. Not like the little Prius500 uses much.
That's funny cuz my buddy thought his rzr 570 got so much better mileage than my p5, until the fuel tank size was brought to light. They have twice the capacity so when I ran low they still had half a tank or more...and our gauge is super conservative. Lo fuel came on and 2.2 gal brought me back to a full gauge.
M
we take our basset Gus with us & it keeps him corralled and safe-one of the best acc we have for our P5
