P1000 Rear Bumper

[bumperm]

Here's Bumper's bumper, that's not really a bumper.

I needed a place to mount my 48" Hi-Lift, a must have as I have a tandem tilt trailer and I don't want to take ramps with me, so the Hi-Lift does double duty to lift the front of the tilt bed, then goes with me on the sxs. Trailer stays blocked up until loading time, so only needs to be lifted once.



I used a short length of 2" diameter pipe, cut in half, to reinforce where the U-bolts squeeze the roll bar - they're painted black so don't show up too well. Also lined the clamps with dense foam rubber.

https://imgur.com/XJnIiX4

Link to the jack mounts:
Amazon.com: Hi-Lift Jack RC-875 Roll Cage Mount (For Jeep JK): Automotive

The jack has to be removed before raising bed, but otherwise does not interfere with bed or tailgate - at the angle I have it mounted.

 

[bumperm]

I started looking for a full cover to protect the jack mechanism (which is lubed), from dirt. Seems the problem has already been addressed with a neoprene zippered cover - for only the part that really needs it!

Amazon.com: Hi-Lift Running Gear Jack Cover, Black: Automotive

 

[Prntckt]

EMP rear did not disappoint

View attachment 269969View attachment 269970

Also does a good job at obstructing my "restricted" license plate lol

Looks good, are the tailgate and dump bed still functional with the EMP bumper in place?

 

[aleaddict]

Looks good, are the tailgate and dump bed still functional with the EMP bumper in place?

Yup

 

[Redhead10082]

Usually build my own too! 🤙
The full seam welded one is for a 1000. I'd sell it if anyone close wants it. Plenty of room designed into it to mount any winch you desire. I built it out of boredom and experimenting. It came out ok, and it's not as heavy as it appears but for our riding style it overkill and then some. I just enjoy fabbing. Other was for our old 700-4.

View attachment 268958 View attachment 268959 View attachment 268960 View attachment 268961

Is that 1000 bumper still available? And where are you located?

 

[panaman]

I have the Honda one. I just got it all installed yesterday and mounted my license plate bracket to it

 

[Boiler363]

Is that 1000 bumper still available? And where are you located?

Sorry it's long gone. Haven't had much time for messing with something different either. Honestly man if you have access to tooling there's no wrong answer. I just start chopping and welding by feel. I understand if access is a problem its a challenge though.

 

[Michiganboy]

I have the @knuckledeep bumper. He started making these years ago. There heavy but sturdy and strong. It works well with the HMF muffler. I drilled and added the brake lights and the reverse lights. Also installed a rear wench and D rings.View attachment 269008View attachment 269009

I think remingtons rig needs this for the rear bumper!

 

[Remington]

View attachment 324138I think remingtons rig needs this for the rear bumper!

Dam right!
IN COMMIN!!!

 

[Sted1201]

Usually build my own too! 🤙
The full seam welded one is for a 1000. I'd sell it if anyone close wants it. Plenty of room designed into it to mount any winch you desire. I built it out of boredom and experimenting. It came out ok, and it's not as heavy as it appears but for our riding style it overkill and then some. I just enjoy fabbing. Other was for our old 700-4.

View attachment 268958 View attachment 268959 View attachment 268960 View attachment 268961

Those are really nice looking bumpers. What Are the prices for the bottom two pics