P1000m5 Remi’s Stroker 30 Build And Other Cool Bs!

Remington submitted a new Garage Item:

Remmy's Stroker 30 Build
And Other Bs!

Sorry for the late build fellas. I must say with work, honey do's and owning a cabin that like another house, it take up a lot of your time! Now that bow hunting season is upon us, more time will be taken up in a good way
This all started when I wanted a SXS to go along with my 2 ATV's and my property/cabin in the great northern woods of northern lower Michigan. There we have some nice trails outside my cabin door. The other was for hunting and general work around the cabin and home. I owned a nice 02' jeep TJ that I fixed up and never really used it that much not to mention the insurance sucks on those! So I convicted my wife of 16 yrs if I sold it I could get a SXS. Now I've owned Polaris ATV's for sometime, and a 2000 Honda Forman that the wife drives. After selling the jeep, I went to looking for a SXS. I wanted a Polaris general, needless to say, nice seats but wasn't impressed. Then I got into a P100-5 and WOW!! I was hooked, and so begins this Journey.

She looked like this when I found her! Needed some wheels
View attachment 23366 View attachment 23367
Ah much better!


Sent from my iPhone using Tapatalk

Read more about this showcase item here...

 

[Remington]

My rims have double bead on inside had to pop over one to get the actual inside bead I had to put almost 40 in them to pop it made rims ring

Sent from my SM-G930U using Tapatalk

Wow! No wonder you had such a time with them!

 

[BWAF]

Wow! No wonder you had such a time with them!

See the extra lip left side

Sent from my SM-G930U using Tapatalk

 

[Remington]

See the extra lip left side View attachment 101326

Sent from my SM-G930U using Tapatalk

Yup, sure do

 

[BWAF]

I'm running 9psi in front 11 in rear what you at

Sent from my SM-G930U using Tapatalk

 

[Remington]

I'm running 9psi in front 11 in rear what you at

Sent from my SM-G930U using Tapatalk

Right now at 12 all the way around. I’m sure depending on what I’m riding in I’ll change it. I’ll be feeling a lot better now lowering them with these

 

[BWAF]

Right now at 12 all the way around. I’m sure depending on what I’m riding in I’ll change it. I’ll be feeling a lot better now lowering them with these

Yep no worries I know I mashed my right front to rim at least twice yesterday on ride no problem

Sent from my SM-G930U using Tapatalk

 

[Remington]

Yep no worries I know I mashed my right front to rim at least twice yesterday on ride no problem

Sent from my SM-G930U using Tapatalk

Sweet!

 

[Remington]

Updated my old tire rack with one from Brick city Fab the V1. My other one was nice and well built, Although it did give me some issues with the pins working there way out. I was also having people I was riding with saying it was bouncing a lot. So when I went to 30’s I decided to try the BCF V1. I will say it is a tuff sturdy rack. I have no doubt it will hold up and no bouncing. Also thanks to @Moses for great customer service.

 

[Tigermark]

Updated my old tire rack with one from Brick city Fab the V1. My other one was nice and well built, Although it did give me some issues with the pins working there way out. I was also having people I was riding with saying it was bouncing a lot. So when I went to 30’s I decided to try the BCF V1. I will say it is a tuff sturdy rack. I have no doubt it will hold up and no bouncing. Also thanks to @Moses for great customer service. View attachment 105033 View attachment 105034 View attachment 105035

Looks good! Colorado ready!

 

[Remington]

Looks good! Colorado ready!

She’s gettin there! Just about done with my rewireing. Got my new stereo and sub done. Ben a long winter of upgrades but she’s lookin mean.

 

[Moses]

Updated my old tire rack with one from Brick city Fab the V1. My other one was nice and well built, Although it did give me some issues with the pins working there way out. I was also having people I was riding with saying it was bouncing a lot. So when I went to 30’s I decided to try the BCF V1. I will say it is a tuff sturdy rack. I have no doubt it will hold up and no bouncing. Also thanks to @Moses for great customer service. View attachment 105033 View attachment 105034 View attachment 105035

Thanks for the feedback! The upper clamp needs to be reversed on both side.

 

[Remington]

Thanks for the feedback! The upper clamp needs to be reversed on both side.

Ha! I was wondering about that! I looked at the pic and couldn’t tell. It worked this way but I will change it. Thanks man for your great communication on my emails. It dosnt get any better than that.

 

[Smitty335]

Updated my old tire rack with one from Brick city Fab the V1. My other one was nice and well built, Although it did give me some issues with the pins working there way out. I was also having people I was riding with saying it was bouncing a lot. So when I went to 30’s I decided to try the BCF V1. I will say it is a tuff sturdy rack. I have no doubt it will hold up and no bouncing. Also thanks to @Moses for great customer service. View attachment 105033 View attachment 105034 View attachment 105035

Looks good!

 

[CumminsPusher]

Ha! I was wondering about that! I looked at the pic and couldn’t tell. It worked this way but I will change it. Thanks man for your great communication on my emails. It dosnt get any better than that.

How awesome is that? Buy a great product and customer service contacts YOU about an issue you’re having. Lol. Looks really good buddy!

 

[BWAF]

Updated my old tire rack with one from Brick city Fab the V1. My other one was nice and well built, Although it did give me some issues with the pins working there way out. I was also having people I was riding with saying it was bouncing a lot. So when I went to 30’s I decided to try the BCF V1. I will say it is a tuff sturdy rack. I have no doubt it will hold up and no bouncing. Also thanks to @Moses for great customer service. View attachment 105033 View attachment 105034 View attachment 105035

That looks really good

Sent from my SM-G930U using Tapatalk

 

[Remington]

@Moses. I was getting ready to change my upper clamps like you said about my top brackets were upside-down needed to be reversed. When I looked back at your site, the pics you have of the V1 the way I currently have it. I blew those pics up so you could see. I’ll change Themis you still suggest that, but are your pics incorrect and do they still need to be reversed?

The bottom one is mine

 

[Moses]

@Moses. I was getting ready to change my upper clamps like you said about my top brackets were upside-down needed to be reversed. When I looked back at your site, the pics you have of the V1 the way I currently have it. I blew those pics up so you could see. I’ll change Themis you still suggest that, but are your pics incorrect and do they still need to be reversed?
View attachment 105958 View attachment 105959
The bottom one is mine
View attachment 105960

yes, I did not know that. The ones on the blown up pic are upside down as well..

 

[Remington]

yes, I did not know that. The ones on the blown up pic are upside down as well..

Cool. Thanks I’ll change them. It didn’t have a flyer/instructions like the harness bar so I just went with the pic. Still an awesome tire carrier

 

[Remington]

@Moses here the finished re work. It passed the look test

 

[Remington]

Here’s my new dash/switch plate I finally finished. Actually it was a few weeks ago but this weather up here, Ben working my bag off. Generator Re sert this week my brain is taxed like AOC’s during the SOTU address

Look at the little bass controller, isn’t it adorable