SATV Boxed Radius Arm Squeak Talon 1000R

JNo323

JNo323

Well-Known Member
Lifetime Member
Jan 3, 2019
84
528
83
Middle, TN
Ownership

  1. 1000-5

  2. Talon R LV
Anyone else installed SuperATV high-clearance boxed radius arms and after a few rides they squeak like a 50 year old worn out car? Took them apart this weekend and used white lithium grease on frame mounting points and they still squeak. It's much better, but still squeaking. Torqued to 58 ft. lbs. per spec. Squeaks are coming from 4 mounting bolts on frame. Just wondering if anyone has something that's worked to eliminate the squeak. Maybe increase torque on bolts? 23 Talon 1000R LV.

IMG 8384
 
SLOWPOKE693

SLOWPOKE693

Well-Known Member
Supporting Member
Mar 10, 2020
1,861
7,350
113
Somewhere in Texas
Ownership

  1. Talon R
That's why replacing uniballs (What Honda uses) with bushings is a dumb idea. Ask SATV if the stock joints fit their boxed arms and if so, install those. Bushings have no business in arms that have 17" of wheel travel, it's just done to keep mfg costs down and for no other reason.
 
JNo323

JNo323

Well-Known Member
Lifetime Member
Jan 3, 2019
84
528
83
Middle, TN
Ownership

  1. 1000-5

  2. Talon R LV
So turns out spitting on that thang worked! Honestly, it was the connecting points at the knuckles that were now squeaking and a couple were already starting to rust a little. Good shot of white lithium and no more squeaks. Thanks everyone for the input/suggestions.
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!