P1000 School me snow plows

[Superthrill]

Day 4 with no power and roads not scraped so power company can get to downed lines, it is time I take care of thing myself!

What is a good quality snow plow for the P1000 ?
Also 66 inch or 72?

 

[Admin]

 

[MTLuckyDan]

I installed a 72" KFI but haven't used it yet. I have plowed for years with an ATV plow - Moose. I like some of the KFI design features better. I am waiting on an Alumalite Armor cab and once installed I'll try to post some photos of my setup. We are starting to get a little snow here in Montana but I haven't had enough to even try the plow yet.

Sent from my P00I using Tapatalk

 

[Superthrill]

I installed a 72" KFI but haven't used it yet. I have plowed for years with an ATV plow - Moose. I like some of the KFI design features better. I am waiting on an Alumalite Armor cab and once installed I'll try to post some photos of my setup. We are starting to get a little snow here in Montana but I haven't had enough to even try the plow yet.

Sent from my P00I using Tapatalk

Was this universal instal or did it come with a machine specific mount?

 

[MTLuckyDan]

Pretty sure machine specific but mounts to 4 factory holes & is simple. Most of assembly is plow & it's not difficult as long as you have the winch installed already. If no winch then it becomes a bigger job right out of the gate.

Sent from my P00I using Tapatalk

 

[Superthrill]

I already have a 4500 viper synthetic rope winch installed. Looking at the KFO online now. Do you plow with chains or just tires?

 

[Superthrill]

Also found a Denali pro plow at side by side stuff. It says it does not fit the 2018 pioneer. Wonder what's different?

 

[Neohio]

Visit this link: Honda SxS Club Online Store
Grab whatever 72" blade fits your fancy. The vehicle mount might need to be modified depending on what winch mount you use.

I am using a 72" Tusk plow. I had to modify the vehicle mount to remove a few ears. I went with the decision to modify the plow mount vs winch mount due to plow mount only being used a few months of the year.

 

[Hondasxs]

Here is a great review on a Denali 72" for a Honda Pioneer 1000 --> P1000 - Review: Denali Plow with Hydro-Turn

Here are a few prices for just the plow kit. Blade, Tube, and Mount.

72" Stright - 629.99
72" Pro - 799.99

If you are interested, You can use HONDA10 for a sweet discount.
Here's the link --> Snow Plow
Just let me know.
Thanks.

 

[Damian]

Day 4 with no power and roads not scraped so power company can get to downed lines, it is time I take care of thing myself!

What is a good quality snow plow for the P1000 ?
Also 66 inch or 72?

I just ordered a 72" ClicknGo2 from Kimpex. Take a look at them on youtube, they have some really neat features.

 

[Firemedic530]

I have had Moose, cycle country and now Warn on ATV'S in the past. I installed a Denali pro purchased from here on a neighbor's P700 last weekend. It is by far the heaviest, best plow I've seen in the ATV/SXS market for the price point. Obviously there are better commercial V-Plows out there in the over $3,000.00 price range, but I would absolutely buy the Denali pro for my P1K5 if we had more snow. I was happy with the Warn provantage on my Rancher until I saw the Denali in person.

 

[Superthrill]

Here is a great review on a Denali 72" for a Honda Pioneer 1000 --> P1000 - Review: Denali Plow with Hydro-Turn

Here are a few prices for just the plow kit. Blade, Tube, and Mount.

72" Stright - 629.99
72" Pro - 799.99

If you are interested, You can use HONDA10 for a sweet discount.
Here's the link --> Snow Plow
Just let me know.
Thanks.

What year model? One of the websights I looked at them on states it does not fit the 2018?

 

[Neohio]

What year model? One of the websights I looked at them on states it does not fit the 2018?

They are all the same. I doubt the manufacturer has been updated, unless they specifically state not for 18.

 

[Superthrill]

They are all the same. I doubt the manufacturer has been updated, unless they specifically state not for 18.

Do the Denali have a steel bottom wear lip or urethane?

 

[Superthrill]

Here is a great review on a Denali 72" for a Honda Pioneer 1000 --> P1000 - Review: Denali Plow with Hydro-Turn

Here are a few prices for just the plow kit. Blade, Tube, and Mount.

72" Stright - 629.99
72" Pro
I


If you are interested, You can use HONDA10 for a sweet discount.
Here's the link --> Snow Plow
Just let me know.
Thanks.

Is that the price with the discount ? Where do you put in the code?

 

[Neohio]

Do the Denali have a steel bottom wear lip or urethane?

I am not sure. I see they have a plastic wearbar/scraper as an add-on. Judging by the pictures I have seen, They come standard with a steel wear bar, plastic is an upgrade/option.

 

[Neohio]

Is that the price with the discount ? Where do you put in the code?

Somewhere in the check out process there will a spot to use the code.

 

[CJH]

What is a good quality snow plow for the P1000 ?

Also 66 inch or 72?

I have a 72" KFI. Picked it for now reason other than my dealer had it in stock and my service agreement gave me 10% off plus free install.

As I recall the next size down would have been narrower than the wheel width when angled.

I do regret not getting a UHMW wear bar and I need to remedy that soon. Might just find an online distributor that can sell me a full sheet already CNC cut for easier shipping. I'll just drill holes and rip bevels if I think it's necessary. One complaint about the stock reversible UHMW wear bars is that they're a bit short so I can have them ripped to whatever width I want.

 

[Hondasxs]

Both the Standard and the Pro Denali come with steel wear bars.

I'll shot you a message to see what your needs are.

 

[MTLuckyDan]

The features I like about the KFI include a reversible steel wear bar, factory mount fit exactly without any modifications, winch mounting connection has 4 alternate mounting points to accommodate different winch/bumper heights or locations & the blade appears to be well made. It also came with a top flap which is an extra with several other brands. As to the function...I'll report on that in a couple weeks. Based on my previous plowing experiences...it looks like it will be great.

Sent from my P00I using Tapatalk

 

[BVerhulst]

I have the Warn 72". Pro: it's wider than the machine when tilted for a fully cleared plow swath. Con: it is WAY too heavy for the front suspension. It squats the front down even when it's fully laid on the ground at rest. Luckily I don't do any appreciable driving with the plow attached, and it detaches very easily.