P1000m3 Haunted Pioneer - The General

[RedFred1]

After seeing other graphics on people's pioneers I contacted Walter at UTV graphics to do some for me.
I have always been a fan of The Haunted Tank comics and the General Lee from Dukes of Hazzard so I decided a mashup of the two would look great on my orange pioneer. These are Walters mock ups. I made the last payment today so he will be shipping them shortly.

I give you... The Haunted Pioneer.

 

[Neohio]

Looks good! @jrplaza2008 is fantastic to work with! He is definitely in the right industry.

 

[Plumber32]

He's amazing!

 

[Plumber32]

After seeing other graphics on people's pioneers I contacted Walter at UTV graphics to do some for me.
I have always been a fan of The Haunted Tank comics and the General Lee from Dukes of Hazzard so I decided a mashup of the two would look great on my orange pioneer. These are Walters mock ups. I made the last payment today so he will be shipping them shortly.

I give you... The Haunted Pioneer.

View attachment 86964View attachment 86965View attachment 86966View attachment 86967

Ya fought all the way Jonny reb!

 

[sharp]

Ya fought all the way Jonny reb!

You should hear Johnny rebels interview on Howard Stern

 

[RedFred1]

To add a ghostly appearance, I installed some blue led strip under the front hood section. I will be adding some along the frame rails and maybe a strip in back...

FredD

 

[RedFred1]

Finally got my underseat fan controls installed. Working on zombie lights and interior lights.

 

[RedFred1]

I got the rear bed/work lights installed and wired... on to the new battery wiring!

 

[RedFred1]

This is where I ended up with the new air intake filter... behind the passenger side dash next to the glove box.

That space looked like it could get some moisture so I added a foam wrap to seal the lower area...

And a rubber cover for the front...

I also got the battery charger mounted on an aluminum plate and the plate anchored to the frame.

 

[BWAF]

This is where I ended up with the new air intake filter... behind the passenger side dash next to the glove box.
View attachment 88395


That space looked like it could get some moisture so I added a foam wrap to seal the lower area...
View attachment 88392

And a rubber cover for the front...
View attachment 88393

I also got the battery charger mounted on an aluminum plate and the plate anchored to the frame.
View attachment 88394

Like the flex hose and the pre-filter what do you use

Sent from my SM-G930U using Tapatalk

 

[RedFred1]

I used this:

3 INCH ADJUSTABLE FLEXIBLE SHORT RAM/COLD AIR INTAKE DUCT TURBO TUBE PIPE HOSE | eBay

and this:

https://www.amazon.com/gp/product/B07F1Q38FX/?tag=sxsweb24-20

I talked about the changes I made here:

P1000 - Prefilter cover

FredD

 

[BWAF]

I used this:

3 INCH ADJUSTABLE FLEXIBLE SHORT RAM/COLD AIR INTAKE DUCT TURBO TUBE PIPE HOSE | eBay

and this:

https://www.amazon.com/gp/product/B07F1Q38FX/?tag=sxsweb24-20

I talked about the changes I made here:

P1000 - Prefilter cover

FredD

Thanks

Sent from my SM-G930U using Tapatalk

 

[RedFred1]

Finally got my dual battery wiring project finished up... now on to the front bumper and new lightbar up front!

 

[RedFred1]

I mounted my lightbar on the bumper using some nice clamps I found on ebay. Looks and works good. Since that was the last Item to complete, mechanically, I took it out for a spin last night. Nice to have it back running again. Now I can take it to the dealer to have the latest recalls and mods taken care of.

I’m going to drop all of the remaining photos here... those that were part of the teardown of all the plastics and then the install of the winch and other wiring...

 

[RedFred1]

Finally got started on the graphics...

 

[RedFred1]

After waiting several weeks for my local vinyl guy to do my hood graphic, he either couldn't or wouldn't apply my graphic, I decided to go ahead and try it myself...

There are a few wrinkles but for my first attempt at a large graphic, I'll take it!

FredD

 

[RedFred1]

Installed...

FredD

 

[RedFred1]

Orange body panel part numbers... partzilla

Body Panels, Zest Orange, YR222R

FENDER SET, FR. (TYPE1) (WL)*YR222R*
Honda
item: 61105-HL4-A22ZA

HOOD, FR. *YR222R*
Honda
item: 61300-HL4-A21ZA

PANEL, R. FR. DOOR *YR222R*
Honda
item: 67225-HL4-A20ZA

PANEL, L. FR. DOOR *YR222R*
Honda
item: 67235-HL4-A20ZA

PANEL SET, R. BED SIDE (TYPE1) (WL) *YR222R*
Honda
item: 81570-HL4-A70ZA

PANEL SET, L. BED SIDE (TYPE1) (WL) *YR222R*
Honda
item: 81580-HL4-A70ZA

 

[RedFred1]

So, over the holiday, my daughter and new son-in-law took out the buggy... rolled it. Chalk it up to rookie driver, alcohol and bad judgement. Luckily they were not injured badly and I was able to pull the buggy out with the tractor, at 2am... in the cold... yeah, not too happy.

Overall, It did not get too damaged but I am still going through it.

It looks like the roll cage did its job but took some damage... the hard top is remarkably strong and took no damage other than some scuffing. I am glad I mounted my lights on the front bumper and not the roof.

I Think this is bent... what do you all think?

Also the two braces are bowed out on the support.

The 2 piece windshield took some scratches as well...

It ended up with the driver side facing the ground. Sat that way for a while. Anything I should look for as far as tranny, motor damage? The gas tank was up so I didn't have fuel everywhere... sadly, I was in no mood for pictures and have no documentation of the crash.

FredD

 

[RedFred1]

Got the roll cage off... Looks pretty cool!