P1000 What kind of trailer do you use to transport your P1k and what do you pull it with?

[saw1]

I just bought a 12ft aluminum flatbed trailer with a 4ft pullout loading ramp and will be pulling it with a Ram 1500 ECO Diesel.

 

[Admin]

 

[batter-up]

I just bought a 12ft aluminum flatbed trailer with a 4ft pullout loading ramp and will be pulling it with a Ram 1500 ECO Diesel. My old trailer had a flip up ramp and I think it will help with mileage not having a sail/wind break following behind the truck.

Will be watching. Have been looking to find a enclosed trailer for my 1000-5 Would be nice to hear some advice from experienced
peeps.


Sent from my iPad using Tapatalk

 

[ohanacreek]

I have a 6x12 but I’m looking to upgrade to a 7x14 enclosed.

 

[Cuoutdoors]

I built a nice 7x10 tilt deck that the honda fits perfectly on. I use it for running around day to day stuff. For big trips I use an 8.5x20 enclosed.

 

[ToddACimer]

18' car hauler. 2011 F150 5.0

 

[GRANITE]

I have a Diamond C 6x12’ single axle with bi-fold gate.

 

[0860silverado]

6'x12' single axle utility trailer with a rear ramp gate. Ramp has a ?gorilla lift? lift assist. I built a cradle for the Honda to drive into and stay secure without using straps. Works beautifully. Can't imagine a faster, easier way to load/unload. Tow vehicle is an '08 6.0L Silverado 2500HD (hence my screen name). If I'm not careful, I'll forget the rig is back there.

 

[mjn]

8.5X20 enclosed cargo trailer. Still have stuff to add to it; gonna put E-trac on the floor & walls etc.. I went with 20' so I can load my wood chipper, our generator, or even my ATV if I want along with the SxS.
Tow vehicle is '14 F350 6.7PS.

 

[OnTheJob]

Tractor Supply 10'x5'6" landscaping trailer with a Ford F150 with 5.0L

 

[JTW]

14x6.5 aluminum trailer pulled by a 3.5 Ecoboost. I’m going to buy an
18-24x8.5 enclosed soon. That is when I can make up my mind on what length.

 

[VenturaChuck]

I use a 7' x 14' Carson tandem axle trailer pulled by my 2003 Bounder 35E with 8.1l Workhorse chassis. For local tows, I use my 2014 Ford Explorer.

 

[OnTheJob]

I had to google that one not being an RV guy

 

[dilligaff82]

8.5X20 enclosed cargo trailer. Still have stuff to add to it; gonna put E-trac on the floor & walls etc.. I went with 20' so I can load my wood chipper, our generator, or even my ATV if I want along with the SxS.
Tow vehicle is '14 F350 6.7PS.

View attachment 78069

Do you think there would be room for a Harley bagger in there with it? I’m looking for a trailer that can haul both but I’m not sure if I should go with a 20 or 24 footer.

 

[JTW]

Do you think there would be room for a Harley bagger in there with it? I’m looking for a trailer that can haul both but I’m not sure if I should go with a 20 or 24 footer.

You need 10-11 foot for a pioneer.

 

[mjn]

Do you think there would be room for a Harley bagger in there with it? I’m looking for a trailer that can haul both but I’m not sure if I should go with a 20 or 24 footer.

ya know... my instinct says yes. Mine is a V-nose, which gives it roughly another 18" or so.

If you put the M/C chalk clear up front, and had e-track on the floor, that'd give you the option of moving the Pioneer back a bit from where you'd put it without the bike. That way you could get the weight/balance right.

 

[BigOL3]

If I am taking just the P1K5, I pull a Diamond 14' trailer. If taking other things I pull the PJ GN 26' Tilt with neck-on-deck, pulled by '17 Ram Laramie 3500.

 

[GlockMeister]

Somertimes i haul with this .....

And somertimes with this....


View attachment 78111

 

[Cuoutdoors]

Do you think there would be room for a Harley bagger in there with it? I’m looking for a trailer that can haul both but I’m not sure if I should go with a 20 or 24 footer.

I have a 20' with shallow v nose. If I put my honda into the V in the front I have 11 foot left over.

 

[ttechnology]

I use a 20' Maxxd N5X, with 6 ft pull outs, that I also use to haul my classic car, rental equipment, etc. It's a bit big but flexible in use. I figure that Pioneer #2 is likely soon , given my wife's love of our first one, so we'll have plenty of room. Pull with a Tundra CrewMax 5.7 4x4 with trailering package.

 

[ohanacreek]

I use a 20' Maxxd N5X, with 6 ft pull outs, that I also use to haul my classic car, rental equipment, etc. It's a bit big but flexible in use. I figure that Pioneer #2 is likely soon , given my wife's love of our first one, so we'll have plenty of room. Pull with a Tundra CrewMax 5.7 4x4 with trailering package.
View attachment 78121

Nice