S
Scamih
Well-Known Member
Lifetime Member
Supporting Member
A couple of weeks ago I asked around how to load a deer into the back of 1000-5 with winch. Didn’t get a good solution so I made this. Started with a 3x3 square tube 3’ long 1/8 thick. Welded the mounting plate that comes with a viper max winch to the bottom. Used a ubolt to secure to bumper. Used a fairlead roller frame on bottom and a fairlead roller to top. Also added a roller From amazon to the side. Used the Snap jerk pulley that came with the viper max winch, strapped it to the back roll bar with ad clamp and cinch strap. Here are some pictures. Lifted a large log into back of tilted bed. Works real good.