![Hondasxs](/data/avatars/m/0/58.jpg?1711993914)
Hondasxs
Club Founder
Staff member
Installing the LED light bar is fairly simple. We have designed it for the basic user with a semi factory machine. Our goal was to make it so it could be installed without having to worry about splicing or running wires to the battery. Our design is relay-free and relies on the factory ACC system to provide the power.
![67aa6e7809a732e23b6d8e7306c6cf69 67aa6e7809a732e23b6d8e7306c6cf69](https://hondasxs.com/data/attachments/300/300011-be49cca2251ab30759df6f04e6db6875.jpg)
For those without a switch panel, we have included a template for the light bar switch.
See PDF attached ---> https://hondasxs.com/attachments/700-led-switch-pdf.300874/
Cut out the template and align it as shown.
Using a sharp box cutter you can cut a hole to the side of the rocker switch.
![C255efa37185f51b600dff662fcd5b9d C255efa37185f51b600dff662fcd5b9d](https://hondasxs.com/data/attachments/300/300000-585030b62ef1b8e05d7dfae7aeb90c34.jpg)
![A0ff283f457562e32c58ed926c6b4f54 A0ff283f457562e32c58ed926c6b4f54](https://hondasxs.com/data/attachments/299/299999-1b6a6ca54475dae6f2762583890b8ae6.jpg)
Next, feed the switch wire harness through this hole.
![62acfc4c2d47f61c606825cff549d3cb 62acfc4c2d47f61c606825cff549d3cb](https://hondasxs.com/data/attachments/300/300002-1a2a9207c305f154d019e1c4060ca7be.jpg)
![D502fb9bf1beb26f23847f36b3343032 D502fb9bf1beb26f23847f36b3343032](https://hondasxs.com/data/attachments/300/300005-0149552ed7cf80b8f4a747f384848dd9.jpg)
Under the hood locate the connector shown and disconnect it.
![1f0e1795e372fd854e06c79ef343ba06 1f0e1795e372fd854e06c79ef343ba06](https://hondasxs.com/data/attachments/299/299997-45d7e88eb5b41a6c796d9825ab49b956.jpg)
![40cfae3302a0e72baff9263c88066c76 40cfae3302a0e72baff9263c88066c76](https://hondasxs.com/data/attachments/300/300001-4543873fb0b6cd5405311551df4bbfcd.jpg)
Now connect the wire harness from the switch to this location.
![85c22054cc14e078c5d13e2ffe093a11 85c22054cc14e078c5d13e2ffe093a11](https://hondasxs.com/data/attachments/300/300007-6d8e7da30916fbbaa61719f9823b3cc8.jpg)
Now we will install the light bar. Using the alen wrench included, unscrew the 1/2's of the clamps and install them on the top bumper bar.
Now, run the wires through the front cowl and up into the hood area.
![90f6925bad279fd0b807a867483df734 90f6925bad279fd0b807a867483df734](https://hondasxs.com/data/attachments/300/300004-31906c9f0304df04b83273e88ebe5c16.jpg)
![F98c53f2f59e3b2c5f57d16043acd3b1 F98c53f2f59e3b2c5f57d16043acd3b1](https://hondasxs.com/data/attachments/300/300008-ff5b4b0461dd9f77f9b01eeff91da592.jpg)
Connect the light bar to the switch wire harness.
![7a919cea77375de495c3f0a91918a892 7a919cea77375de495c3f0a91918a892](https://hondasxs.com/data/attachments/300/300009-e4a67cd3609509600e67c3c469540942.jpg)
The light should work as designed.
It is tied to the factory ACC circuit and pulls 3 amps of power.
It only works with key-on.
Any questions feel free to contact us.
![D914c1ab81d1c3eb42c8b57933925930 D914c1ab81d1c3eb42c8b57933925930](https://hondasxs.com/data/attachments/300/300003-d38fc70ad66cf5092be26c6f7cf2f32f.jpg)
![70a8f28f9e67922df73e4bdd66cbc59d 70a8f28f9e67922df73e4bdd66cbc59d](https://hondasxs.com/data/attachments/300/300006-b907854edc5e4f9436a24b5675e248c7.jpg)
![14c0a72cfe8c7d02e3d92faa57563099 14c0a72cfe8c7d02e3d92faa57563099](https://hondasxs.com/data/attachments/300/300010-8b5020b13df098a28c71dcc95ef7d33f.jpg)
![Aa25d969686a56cef011637e3b657c12 Aa25d969686a56cef011637e3b657c12](https://hondasxs.com/data/attachments/300/300014-af16eab5bd52255b302403918423c6e1.jpg)
![67aa6e7809a732e23b6d8e7306c6cf69 67aa6e7809a732e23b6d8e7306c6cf69](https://hondasxs.com/data/attachments/300/300011-be49cca2251ab30759df6f04e6db6875.jpg)
For those without a switch panel, we have included a template for the light bar switch.
See PDF attached ---> https://hondasxs.com/attachments/700-led-switch-pdf.300874/
Cut out the template and align it as shown.
Using a sharp box cutter you can cut a hole to the side of the rocker switch.
![C255efa37185f51b600dff662fcd5b9d C255efa37185f51b600dff662fcd5b9d](https://hondasxs.com/data/attachments/300/300000-585030b62ef1b8e05d7dfae7aeb90c34.jpg)
![A0ff283f457562e32c58ed926c6b4f54 A0ff283f457562e32c58ed926c6b4f54](https://hondasxs.com/data/attachments/299/299999-1b6a6ca54475dae6f2762583890b8ae6.jpg)
Next, feed the switch wire harness through this hole.
![62acfc4c2d47f61c606825cff549d3cb 62acfc4c2d47f61c606825cff549d3cb](https://hondasxs.com/data/attachments/300/300002-1a2a9207c305f154d019e1c4060ca7be.jpg)
![D502fb9bf1beb26f23847f36b3343032 D502fb9bf1beb26f23847f36b3343032](https://hondasxs.com/data/attachments/300/300005-0149552ed7cf80b8f4a747f384848dd9.jpg)
Under the hood locate the connector shown and disconnect it.
![1f0e1795e372fd854e06c79ef343ba06 1f0e1795e372fd854e06c79ef343ba06](https://hondasxs.com/data/attachments/299/299997-45d7e88eb5b41a6c796d9825ab49b956.jpg)
![40cfae3302a0e72baff9263c88066c76 40cfae3302a0e72baff9263c88066c76](https://hondasxs.com/data/attachments/300/300001-4543873fb0b6cd5405311551df4bbfcd.jpg)
Now connect the wire harness from the switch to this location.
![85c22054cc14e078c5d13e2ffe093a11 85c22054cc14e078c5d13e2ffe093a11](https://hondasxs.com/data/attachments/300/300007-6d8e7da30916fbbaa61719f9823b3cc8.jpg)
Now we will install the light bar. Using the alen wrench included, unscrew the 1/2's of the clamps and install them on the top bumper bar.
Now, run the wires through the front cowl and up into the hood area.
![90f6925bad279fd0b807a867483df734 90f6925bad279fd0b807a867483df734](https://hondasxs.com/data/attachments/300/300004-31906c9f0304df04b83273e88ebe5c16.jpg)
![F98c53f2f59e3b2c5f57d16043acd3b1 F98c53f2f59e3b2c5f57d16043acd3b1](https://hondasxs.com/data/attachments/300/300008-ff5b4b0461dd9f77f9b01eeff91da592.jpg)
Connect the light bar to the switch wire harness.
![7a919cea77375de495c3f0a91918a892 7a919cea77375de495c3f0a91918a892](https://hondasxs.com/data/attachments/300/300009-e4a67cd3609509600e67c3c469540942.jpg)
The light should work as designed.
It is tied to the factory ACC circuit and pulls 3 amps of power.
It only works with key-on.
Any questions feel free to contact us.
![D914c1ab81d1c3eb42c8b57933925930 D914c1ab81d1c3eb42c8b57933925930](https://hondasxs.com/data/attachments/300/300003-d38fc70ad66cf5092be26c6f7cf2f32f.jpg)
![70a8f28f9e67922df73e4bdd66cbc59d 70a8f28f9e67922df73e4bdd66cbc59d](https://hondasxs.com/data/attachments/300/300006-b907854edc5e4f9436a24b5675e248c7.jpg)
![14c0a72cfe8c7d02e3d92faa57563099 14c0a72cfe8c7d02e3d92faa57563099](https://hondasxs.com/data/attachments/300/300010-8b5020b13df098a28c71dcc95ef7d33f.jpg)
![6900400e231036099e7e1efa46acb646 6900400e231036099e7e1efa46acb646](https://hondasxs.com/data/attachments/300/300012-cc3fcfd40a2633cdcd8a5dcf4d671f4c.jpg)
![Aa25d969686a56cef011637e3b657c12 Aa25d969686a56cef011637e3b657c12](https://hondasxs.com/data/attachments/300/300014-af16eab5bd52255b302403918423c6e1.jpg)
Attachments
Last edited: