lee
Village Idiot
Lifetime Member
Club Contributor
So @JACKAL Cindy wants to know how’s it feel to be part of the club again?
Haha, p1k looks good, I’ll check it out next weekend.
Haha, p1k looks good, I’ll check it out next weekend.
It feels good, took wife out in it for a short 10 mile jaunt. She said OMG this thing is so quiet.So @JACKAL Cindy wants to know how’s it feel to be part of the club again?
Haha, p1k looks good, I’ll check it out next weekend.
I for one would definitely like to know how these turn outLED Headlights w/ DRL & Turn Signals: https://www.amazon.com/gp/product/B0CRR4RHW4/?tag=sxsweb24-20
I will do a post showing OEM vs these LED lights Tuesday evening after installation and test ride at night.I for one would definitely like to know how these turn out
The 2022+ have enhanced underbelly coverage that is a vast improvement for many owners, however the rocks where I live require heavy duty stuff to fully protect the undercarriage.
I did notice how beefy the inner front fender well was, very nice. SuperATV did take this into account on their install instructions.@JACKAL how dose the skidplate play with the plastic guard in the front fender well?
I'm guessing that inner fender plate was put there for a reason, did you notice how thick it is?
Being able to defect a stick under the vehicle and keep it there is a good thing.
But I have been afraid the after market skids would allow a stick between the OEM plate and the skid.
Bouncing around between the underside of the floor and the skid is probably not a good thing.
Dropped these in my wish list too. I am interested on how they wire to the turn pro signal kit as well. I dropped someThanks for the headlight review. I dropped these in my wish list.
I’m assuming the turn signals just have wires to splice. Our buggy has the sequential TurnPro kit. Can’t remember the details of install but I think there wasn’t any splicing and everything had “factory” connectors. Of course I could cut and splice. Do you think this would work with the sequential kit? Expect I’d pull the kit front blinkers and just use the ones built into these headlights.
I’ll also be installing a kit on my moms buggy soon so may reuse the sequential LED on hers. Not sure where it does the logic to make them scroll though.
There is two pigtail wires in addition to the OEM plug and play harness (for hi/ low beam). One pigtail goes to key-on power for daytime running lights, the second pigtail taps into the positive wire for each front turn signal, in my case I kept the sequential LEDs from Turn-Pro in place and tapped into it so it all works in unison.Dropped these in my wish list too. I am interested on how they wire to the turn pro signal kit as well. I dropped some
LED replacement bulbs in my OEM lights for now, but love this integration.
I left the sequential led turn pro lights because I already had them there and they matched right in with the new headlights .Thank you!
Heads up guys, listing shows 2-5 week wait now.
So you left the sequential blinker with these. Interesting. Any particular reason?
Oh man, the way they wired into the fuse box and tapped into the other wire by just twisting together and adding some tape.