P1k part out

[Ohio4x4]

I've got a red 2018 p1k-3 I'm parting out. I'm looking to keep the front frame section and sub trans. The engine is apart from the previous owner and most of the plastic is broken or faded.
Wheels and sold
3 seat roof $200
Bed taillights broken $100
Rops look straight no signs of flops $500
Doors $100
Also have engine cases wiring harness and lots of other pieces machine was running driving farm used unit and engine blew while idling

 

[Admin]

 

[NTCPrezJB]

I've got a red 2018 p1k-3 I'm parting out. I'm looking to keep the front frame section and sub trans. The engine is apart from the previous owner and most of the plastic is broken or faded.

View attachment 421076

Have a cheap factory front rim for a spare for me?

 

[Mopower58]

Have a cheap factory front rim for a spare for me?

A good example of how ”Fast” red turns to pink!

 

[Ohio4x4]

Have a cheap factory front rim for a spare for me?

Yep as long as you don't care about the condition of the tire.

 

[NTCPrezJB]

Yep as long as you don't care about the condition of the tire.

Sure don’t. I have a tire.

 

[Ohio4x4]

A good example of how ”Fast” red turns to pink!

Farm life wasn't friendly to the old girls looks.

 

[Mopower58]

Farm life wasn't friendly to the old girls looks.

I agree, looks like it was sitting beside the Titanic a few years!

 

[ChadD]

Farm life wasn't friendly to the old girls looks.

The honda didn't hold up too well either 😉🤪🤣🤣🤣

 

[Plumber32]

I've got a red 2018 p1k-3 I'm parting out. I'm looking to keep the front frame section and sub trans. The engine is apart from the previous owner and most of the plastic is broken or faded.

View attachment 421076

Ah hell we fixed worse on the side of a trail!

 

[futzin]

The engine is apart . . .

How far apart?
@906UP 🤣

 

[Ohio4x4]

How far apart?
@906UP 🤣

Missing some internal stuff. Head and cases all look to be there. Light scratches and suface rust on cylinder walls. Im going to see if my brother can bore and hone it in the race shop. Izzys going to strip the rest of the body off this evening.

 

[Ohio4x4]

Ah hell we fixed worse on the side of a trail!

That's kind of what I was thinking when I bought this thing. Joey going after the control arm on brads machine was a life saver. I figured buying this one I have a spare one of everything.

 

[Plumber32]

That's kind of what I was thinking when I bought this thing. Joey going after the control arm on brads machine was a life saver. I figured buying this one I have a spare one of

You'll use it up for sure.

 

[rubber_duck13]

I need 2 plastic pieces, the drivers side panel (part number: 83650-HL4-L01ZA, goes from under the drivers seat to the rear step right infront of the rear tire) and the cover over the engine (part number: 76350-HL4-A00ZA). I have a 1000-5, it looks like the part number for the side panel is the same for the 1000-5 and 1000-3, but the cover over the engine may be different. If you have one and there is no physical damage, I'll take it.