P1000 SIDE PIECE 2.0

[Mopower58]

That’s because you lost the key after you unloaded it and it took you that long to find them

I bet my Pioneer is started way more than your pavement princesses! 😂 Mr Lost and Found!

 

[Admin]

 

[JenElio]

That’s because you lost the key after you unloaded it and it took you that long to find it.

Was that before or after you killed it while driving with the wench running?.......🙄😂😂😂

 

[Backwoods]

Was that before or after you killed it while driving with the wench running?.......🙄😂😂😂

That’s another story, but I will say it will destroy a mounting plate

 

[Jason W]

Well, got the trail armor a arm skids put on, new battery installed, every single connector on the machine I could I dielectric greased the connector.

No faults no problems now.

Adjusted coilovers with wieght , back to correct height.

 

[Jason W]

Now to decide on wheels, im thinking 5+2, 1.5 spacer on back.

Thinking gray wheel

 

[Jankyeye]

I like grey wheels.

 

[Jason W]

I'm thinking either gray, or raw aluminum.

 

[Mopower58]

I'm thinking either gray, or raw aluminum.

I like these EMAW put on his Talon.

 

[Jason W]

I like these EMAW put on his Talon.
View attachment 432937

Yep been looking at those

 

[Jason W]

Went with the tusk unita beadlock 14x7. 5+2 off set

 

[Jason W]

Also orderd some Colby valve trail valve stems, a jump pack, and a couple extra c02 inflators

 

[Mopower58]

Also orderd some Colby valve trail valve stems, a jump pack, and a couple extra c02 inflators

I thought I was cutting edge with a plug kit! 🤔🤔

 

[Jason W]

I thought I was cutting edge with a plug kit! 🤔🤔

Hopefully I don't cut no edges!

 

[Mopower58]

Hopefully I don't cut no edges!

When I went to TO in 2022 I set my air pressure on 14 PSI to eliminate pinch flats and it worked. I don’t drive like a bat out of hell though!