Vikes79 longship rebuild thread

Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
11,102
107,746
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)

Image
 
906UP

906UP

Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
Jul 6, 2017
13,203
123,392
113
da Yoop
Ownership

  1. 1000-3

  2. Talon X
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)

View attachment 427673
Yah, it's a good idea to tack the caps. @SuperATV is supposed to be working on a CV shaft for the 4 seaters. I put one in my X2.....AMAZING DIFFERENCE
 
Stilly1155

Stilly1155

Well-Known Member
Supporting Member
Dec 1, 2020
74
326
53
Peoria AZ
Ownership

  1. Talon X4
I did my 21 x4 when it had 1,500 miles on it. Upon inspection then all caps were still tight. Don't forget to disconnect your battery terminals and I also disconnected the connection to the CPU.
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)
 
CID

CID

Well-Known Member
Lifetime Member
Supporting Member
Oct 27, 2019
5,093
22,896
113
SE Denver-ish
Ownership

  1. Talon R
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)

View attachment 427673
Remember to move your ground when tacking the caps so you don't run welding current through the U-joint bearings. :oops:
 
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
11,102
107,746
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
got some goodies from club store and a cheap mirror set off of Amazon today! Now I can finish the electrical on the winch etc.

NTC and HFA stickers i already had in reserve

Image
 
SuperATV

SuperATV

Well-Known Member
Vendor
Dec 5, 2013
1,254
8,764
113
Madison, IN
www.superatv.com
Yah, it's a good idea to tack the caps. @SuperATV is supposed to be working on a CV shaft for the 4 seaters. I put one in my X2.....AMAZING DIFFERENCE
Finally got some info on this. They keep bumping it back for some reason. I just bumped it back up the list. No good date for now, but I brought it back to the top of the list.
 
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
11,102
107,746
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Got some kemimoto lower inserts and what I was hoping was the RR door panel today.

IMG 6417


Hopefully it won’t take another 3 weeks to get the correct panel. 🤦🏼‍♂️

Still waiting for the hood from the mothership.
 
Last edited:
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
11,102
107,746
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Got some kemimoto lower inserts and what I was hoping was the RR door panel today.

View attachment 428207

Hopefully it won’t take another 3 weeks to get the correct panel. 🤦🏼‍♂️

Still waiting for the hood from the mothership.
Sent back the panel…vendor claims I will receive the panel for the passenger side in the next week.

🤷‍♂️
 
advertisement
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
11,102
107,746
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Thanks @SuperATV for the help on getting the windshield section replaced !!!

Just a small detail….not 1 dam sticker!

I remember asking!

Don’t worry…it’s all good, thanks for the deal on the part!

IMG 6427
 
advertisement