P500 New wheels and tires now pulls to right

[Amitchellr]

Installed new itp steel wheels 12x7 5+2 and tusk terrabite 25x8x12 in front and 25x10x12 in back. Noticed after installing that the p520 now seems to pull to the right. Has anyone else experienced this? Can’t recall if it had done it with the stock tires. Machine only has 54 miles on it. Any feed back would be greatly appreciated.

 

[Admin]

 

[Neohio]

Check your tire pressures.

 

[Mopower58]

Like the Beast said make sure air pressures are equal left to right. If that doesn't resolve the problem try putting the left hand tires on the right and right hand on the left and see if that resolves the problem.

 

[Amitchellr]

Check your tire pressures.

Thank you. I checked the tires and all are at 10psi. cant recall if it did it before but wonder if the radial tire and weight made it more noticeable. The tires look straight when looking at them so not sure.

 

[gullyjumper]

He's right, mine was doing the same thing , I checked and added some air and that fixed the problem.

 

[Amitchellr]

Like the Beast said make sure air pressures are equal left to right. If that doesn't resolve the problem try putting the left hand tires on the right and right hand on the left and see if that resolves the problem.

One of the Terrabites seem out of round and Rockymountain is sending a new one. That tire is on the passenger side. I will have to switch sides and see if the pulling changes.