Pioneer 1000-5 Spare Tire Carrier from SuperATV

[SuperATV]

Check this thing out!

Honda Pioneer 1000-5 Spare Tire Carrier - Honda Pioneer 1000-5 Spare Tire Carrier






FITMENT

• Honda Pioneer 1000-5 : 2016+
• Honda Pioneer 1000-5 Deluxe : 2016+
• Honda Pioneer 1000-5 Limited Edition : 2017+

FEATURES

• Mounts to the rear of your vehicle with heavy-duty clamps
• Swings out to allow access to the bed and secures closed with a pin
• Powdercoated for maximum durability
• Made with 1-3/4” steel tubing
• Bolt pattern: 4x136
• Wheel studs: M12x1.5
• Accommodates tires of all sizes (up to 70 pounds)
• Easy to install—no drilling or welding required
• Comes with full-color instructions and all required hardware

 

[aauman88]

Where can I see all the info on that build?

 

[SuperATV]

Where can I see all the info on that build?

Shoot! What do you want to know? I'll try to answer whatever I can.

Looks like...
- 6" lift kit Honda Pioneer 1000 6" Lift Kit
- 6" Portals Honda Pioneer 1000 6" Portal Gear Lift
- Frame Stiffener Honda Pioneer 1000 Frame Stiffener / Gusset Kit
- 37.5" x 8" x 22" Assassinators SuperATV Assassinator UTV / ATV Mud Tires
- Flip Front Windshield Honda Pioneer 1000 Scratch Resistant Flip Windshield
- Flip Rear Windshield Honda Pioneer 1000 Rear Windshield

 

[aauman88]

Very nice. I had not seen the rear flip windshield. Great looking rig

 

[SuperATV]

Very nice. I had not seen the rear flip windshield. Great looking rig

Thanks @aauman88 ! It's a pretty sick setup. We have that one all jacked up with all the goodies on it right now for the winter. Its a monster, and the enclosure really helps.

 

[100Acre]

That's a nice mount but, way too much $$$ just to mount a spare tire!

 

[SuperATV]

Worth it if you know you're getting into some rough stuff...far out into the wild.

 

[Bad_bowtie]

I love mine!

 

[100Acre]

Worth it if you know you're getting into some rough stuff...far out into the wild.

or I can just throw it in the back seat for free

 

[100Acre]

besides mine is a 2018. the ones listed above are for earlier years. I'm not saying it's not worth it. I'm just sayin g it's more than I can afford for a spare tire

 

[Bad_bowtie]

besides mine is a 2018. the ones listed above are for earlier years. I'm not saying it's not worth it. I'm just sayin g it's more than I can afford for a spare tire

Mines an 18 also, no difference in years. My backseats are usually full so I had to do something. I like this much more than the receiver mounted spare carrier I had before it, since it swings open and allows the bed to dump or tailgate to open.

My previous spare

 

[Scoop]

I love mine!

View attachment 202519

I know this is a few years old, @Bad_bowtie, but do you still love your SATV spare tire carrier?

I don't need a bed extender. We never run with the jump seats up if we are going anywhere I feel I need to carry a spare and I mount my Rotopax to my Milwaukee Packout boxes in the bed.

I don't mind having to open it to use the dump bed, but I may look at trying to replace the two bolts on the one side with some kind of quick disconnect pins.

What size tire do you carry? I run 30x10-15 on 15x7 all the way around. Tire measures 29" actually.

Has it performed well? Would you buy it again?

The 15% off site wide sale @ SuperATV might very well get me to add to cart!

Thanks!

 

[Bad_bowtie]

I know this is a few years old, @Bad_bowtie, but do you still love your SATV spare tire carrier?

I don't need a bed extender. We never run with the jump seats up if we are going anywhere I feel I need to carry a spare and I mount my Rotopax to my Milwaukee Packout boxes in the bed.

I don't mind having to open it to use the dump bed, but I may look at trying to replace the two bolts on the one side with some kind of quick disconnect pins.

What size tire do you carry? I run 30x10-15 on 15x7 all the way around. Tire measures 29" actually.

Has it performed well? Would you buy it again?

The 15% off site wide sale @ SuperATV might very well get me to add to cart!

Thanks!

I sold the carrier to a member here at the 21' Takeover. It's well built and very handy but I didn't like all the extra weight hanging back there on some of the more extreme rides we go on. It held a 30x10r14 very well.

 

[Scoop]

Thanks for the feedback, @Bad_bowtie.

That's why I didn't go with a bed extender that also carried a tire. Those push the weight even further out. Hoping this is a good compromise. My Rotopax packs mount to my Milwaukee Packouts, and the Packout adapters are mounted to the back of the jump seats. Hoping that weight, which is more forward than something on the tailgate with an extender, will help minimize the effect of the spare, especially with the carrier keeping it closer to the dump bed vs an extender with a mounted tire.

Carry the weight vs have no spare. I do carry all the obligatory tire repair gear, though. We shall see!

Thx again.