P1000 Soft enclosure 1000-M3

[JimBrockman]

Sorry if this has been asked before.
I purchased a soft cab enclosure and the problem I’m having is getting it to attach to the rear tube around the roof clamps.
Are there redesigned clamps for a Honda roof?
The rear window piece won’t come up high enough to keep even moisture out the way it appears
Thanks for any answers.
Maybe I’m just overlooking the obvious
Jim

 

[Hawk53]

Sorry if this has been asked before.
I purchased a soft cab enclosure and the problem I’m having is getting it to attach to the rear tube around the roof clamps.
Are there redesigned clamps for a Honda roof?
The rear window piece won’t come up high enough to keep even moisture out the way it appears
Thanks for any answers.
Maybe I’m just overlooking the obvious
Jim

Can you show us what you got going on?

 

[JimBrockman]

Can you show us what you got going on?

Hawk53 this clamp is my issue.
The exterior didn’t want to stay up to where the roof would actually cover the enclosure.
I came up with loosening the clamps and pinching the top of the enclosure between the roof and the roof clamp to make sure it would stay up.
It just doesn’t look right to me but it will work.
Thanks

 

[tjoreo]

Just curious what brand the rear enclosure was? If it is Honda brand, could it be for a 1000-5 vs the 3? I had a friend offer me a rear 3 panel for my 5 seater but according to the directions they were different.

 

[JimBrockman]

Just curious what brand the rear enclosure was? If it is Honda brand, could it be for a 1000-5 vs the 3? I had a friend offer me a rear 3 panel for my 5 seater but according to the directions they were different.

Honestly I don’t remember the brand but it is not a Honda brand.
I purchased this from Evetything Honda Off-road.

 

[Hawk53]

View attachment 409816
Hawk53 this clamp is my issue.
The exterior didn’t want to stay up to where the roof would actually cover the enclosure.
I came up with loosening the clamps and pinching the top of the enclosure between the roof and the roof clamp to make sure it would stay up.
It just doesn’t look right to me but it will work.
Thanks

Doesnt look like it has a window or is there another zipper?

 

[sek-hunter]

Mine was the same way. I took the screws out of the clamp, poked some holes in the fabric, and ran the screws thru the fabric of the back panel into the clamp.

I never take my roof off, so it isn't an issue.

Honda brand roof, clamps, and back panel....

 

[906UP]

......poked some holes in the fabric, and ran the screws thru the fabric of the back panel into the clamp.

This, heat up a nail or something similar, that will melt the fabric and keep it from fraying

 

[Remington]

Honestly I don’t remember the brand but it is not a Honda brand.
I purchased this from Evetything Honda Off-road.

Didnt say on the box or in your purchase history on the site?
This will help so if someone else has the same one, can give u proper insite before u do something to compromise it and you cant return it if u have to

 

[john790]

Thats the way i did mine also.Its the only way i could get it to look like something.Heat up a nail and burn them in.Three years still good.