Talon screw-in oil fill funnel

[highpocket74]

Got the idea for this from the oil fill funnel I downloaded to fit my Subaru.

It's not a big funnel but I'm limited on room to make this screw into the fill neck.

I will make this a $1 store download for the 3d printer guys out there. My test unit was printed with .20 layer height and the threads were very nice and smooth.

Honda Talon Screw-in Oil Fill Funnel | 10-80 Dirt Sports

Downloadable 3D Print file (stl) for those who like to tinker with 3D printing. Designed by 10-80 Dirt Sports from our Talon owner experience. Fits '19- and up Talon R/X 4 seat models3D Print recommendations: Print with ASA automotive-grade filament. It's very durable and made for outdoor use...

www.10-80dirtsports.com

 

[Admin]

 

[highpocket74]

Day job has been slow since January so I'm not full time running wide open. I've been making a little time to refine some of my designs. This oil fill funnel has been updated.

• Increased the wall thickness on the threaded neck to prevent any future breaks although no breaks have been reported to me. This is simply strengthening the part to my preference.
• Added the 10-80 logo to the funnel. I'll be printing a sample soon to make sure this is still easy to print for those who download the file. The sample will be printed with PETG material to see if it's more appropriate for this application than the current ASA material.

 

[Hello_Darkness]

Day job has been slow since January so I'm not full time running wide open. I've been making a little time to refine some of my designs. This oil fill funnel has been updated.

• Increased the wall thickness on the threaded neck to prevent any future breaks although no breaks have been reported to me. This is simply strengthening the part to my preference.
• Added the 10-80 logo to the funnel. I'll be printing a sample soon to make sure this is still easy to print for those who download the file. The sample will be printed with PETG material to see if it's more appropriate for this application than the current ASA material.

View attachment 467294

When will the new version be available on the website, I'd much rather own one with the logo on it so all the assholes at work will know where to get their own and stop using mine

 

[highpocket74]

Later this week or early next week, after I print a test piece. The funnel will print fine, I want to test the logo for any support requirements.

 

[JACKAL]

Not to take anything away but, the DEF fluid spouts fit all gallon oil jugs, are vented and plenty long. Hard to beat for cheap funnel substitute.

 

[CID]

Later this week or early next week, after I print a test piece. The funnel will print fine, I want to test the logo for any support requirements.

How hard is it to match the thread pitch? And where would you find that info? Keep it short, I don't have a printer, just curious and won't understand a long, detailed answer anyway -