D
Since winter is fast approaching decided I wanted to make a few modifications to my snow plow. First was to add a pulley for the winch cable to make things easier on the winch. I found an old belt pulley laying around and drilled out the hole with a 5/8" reamer for the steel bushing(was an extra spacer that came with the plow) and even found a press in grease fitting that fit in the set screw hole just because why not-then it won't squeak. The plow originally came with bolts/spacers for the winch attach point and I didn't want to use wrenches to take the pulley on/off. So I found a 3/8th eye bolt laying around to use as a pin, and welded a washer to it and then drilled a hole for a cotter key.
![20231111 131936 20231111 131936](https://hondasxs.com/data/attachments/408/408402-441663ae0bd29020433ddb78d6e9e672.jpg)
![20231111 130948 20231111 130948](https://hondasxs.com/data/attachments/408/408398-57a11ede2844797cb216f382c59d2016.jpg)
![20231111 131200 20231111 131200](https://hondasxs.com/data/attachments/408/408399-f9586e2b413e92cb24fa5883f76ee266.jpg)
![20231111 131403 20231111 131403](https://hondasxs.com/data/attachments/408/408401-1b832aa817c19c7d09854c492153a66c.jpg)
![20231111 131936 20231111 131936](https://hondasxs.com/data/attachments/408/408402-441663ae0bd29020433ddb78d6e9e672.jpg)