P1000 Honda OEM wiper wiring diagram

[dweber23tr]

I have purchased the OEM honda washer/wiper setup for my 2023 1000-5 trail. I do not have the OEM fuse box, but rather an aftermarket one. Wondering if the diagram referenced in this post, is still correct? I know the P/N, 0se10-hl4-a01, for the 2022+ wiper is different than previous years.

This is the post I found

P1000 - Honda OEM windsheild wiper

Hi all I am looking to get a winsheild wiper. Drove around in drizzle all day yesterday and was no fun driving with my head out the window so I could see. The OEM is about 300.00. The wiper for the 700 was about 180, but only has a swing of @140 degrees. Can anyone tell me if the wiper for...

hondasxs.com

 

[Admin]

 

[Hondasxs]

I am not sure but I want to help.
I have the male connector available. its fairly expensive as its custom.

6 pin mating pigtail connector for 2022+ Wiper Kit. Talon and Pioneer

6 pin mating connector for 2022+ Talon/Pioneer Wiper Kit. - Male connector with 6 pinch pigtails. This connector is custom made to fit the 6 Pin connector for the wiper kit of the Honda Talon or Pioneer years 2022+. No instructions provided. *female connector Not included.

store.hondasxs.com

Sent from my SM-G996U using Tapatalk

 

[dweber23tr]

The wiring for the wiper looks like it should be the same as what was in that link or at least the wire colors in the harness match. But the 22+ models include a washer sprayer but the wiring for the washer and the switch is where I am a little lost. The washer pump is just 2 wires but I'm guessing part of the power for that also activates the wiper when the washer is pressed on the switch which would need to be wired in with the relay?

 

[ODAMO]

I have purchased the OEM honda washer/wiper setup for my 2023 1000-5 trail. I do not have the OEM fuse box, but rather an aftermarket one. Wondering if the diagram referenced in this post, is still correct? I know the P/N, 0se10-hl4-a01, for the 2022+ wiper is different than previous years.

This is the post I found

P1000 - Honda OEM windsheild wiper

Hi all I am looking to get a winsheild wiper. Drove around in drizzle all day yesterday and was no fun driving with my head out the window so I could see. The OEM is about 300.00. The wiper for the 700 was about 180, but only has a swing of @140 degrees. Can anyone tell me if the wiper for...

hondasxs.com

That wiring dia. works. The washer pump is separate from this.
After all the work you will be as disapointed as I am with the oem Honda wiper, It only sweeps about 135°.

 

[dweber23tr]

That wiring dia. works. The washer pump is separate from this.
After all the work you will be as disapointed as I am with the oem Honda wiper, It only sweeps about 135°.

Yes I got the hardware installed and just manually jumped the wires to try things out and yes a wider sweep would be nice but it isn't horrible. I am going to try to find a relay tomorrow at the auto parts store but still unsure of how to wire the switch. The switch has 5 terminals.

 

[ODAMO]

As your holding it. Power in middle left and jumped to middle right. Bottom left to 86 on relay. Bottom right to washer pump

 

[dweber23tr]

As your holding it. Power in middle left and jumped to middle right. Bottom left to 86 on relay. Bottom right to washer pump

What is the single one on top?

 

[ODAMO]

What is the single one on top?

Switch illumination? I think

 

[dweber23tr]

Switch illumination? I think

I tried that for illumination on the bench but nothing activates the light . It looks like the switch is supposed to be illuminated when on but putting it to either + or - doesn't do anything.

 

[dweber23tr]

Actually it must not be used. I popped the switch cover plate off and no led even though the cover is meant for an led. That is dumb. If anyone has a source for a similar back-lit switch please let me know.

 

[dweber23tr]

For reference I found a switch I'll be trying at some point, https://www.amazon.com/Washer-Wiper-Rocker-Switch-Off/dp/B0BDFH8SCN?tag=sxsweb24-20 . I wanted a square one, not a rounded corner one but this is all I can find. Maybe I can swap cover plates

 

[dweber23tr]

Wanted to circle back to this because I have an issue with this. Randomly the wiper will not turn off. I have checked all the wiring connections and replaced the relay once. I am not sure what else besides the relay it could be? Switch?

 

[NorthernJoe]

Wanted to circle back to this because I have an issue with this. Randomly the wiper will not turn off. I have checked all the wiring connections and replaced the relay once. I am not sure what else besides the relay it could be? Switch?

check the park switch in the wiper motor when the wiper leaves the home position the park switch closes and supplies a second +12v to the relay to bring the wiper back to the home position. If that switch sticks, then you would have power to the relay regardless of your wiper switch setting

 

[dweber23tr]

check the park switch in the wiper motor when the wiper leaves the home position the park switch closes and supplies a second +12v to the relay to bring the wiper back to the home position. If that switch sticks, then you would have power to the relay regardless of your wiper switch settingView attachment 429724

So that is a 4 pin relay diagram, correct? Mine is setup with a 5 pin?

 

[NorthernJoe]

So that is a 4 pin relay diagram, correct? Mine is setup with a 5 pin?

I do not have the Honda schematic I arrived at this based on voltages on the 4 wires at the wiper motor. It is possible that the park switch connects to the relay? You have changed the relay, so in my mind the next things to check are the switches. The park switch is harder to get to, so Murphys law would suggest to look there first