Here is the info on the lit, It is made by Xtreme Products
XTREME Products http://www.xpatv.com
Here is the info they sent me on them.
Our 3” kit includes brackets for the bottom of the front along with spacers for the top of the shocks. In the rear it is just a bracket lift no spacers were needed. The front suspension is extremely soft on this bike and needed spacers to help keep a solid lift. With tow not very small guys the bike would have 3 inches of lift when we left the shop. Returned the bike would still be at 3 inches of lift all around.
This kit retails for $344.54 and ships for $13.50 to the continental U.S. Hawaii, Alaska, and Canada have different rates.
We also have a Big Red lift that is a full bracket lift that retails for $250.34 and same shipping rates apply to it. It is only a 2” lift due to the fact there was axle bump at 3 inches so the lift was dropped down to a safe height so stock equipment can be used.
All of our lifts use the OEM axles, tie rods, and ball joints. We find the maximum amount of lift possible and check for axle bump, binding, and angles. If any lift pushes the stock parts too far we drop it to a safe level to where stock axles will work and be at safe angles.