Multi Custom traction brake/gas pedal- 2foot'in it.

[Hondasxs]

Here is a simple mod I made just before Windrock. This allows me to use both feet to hold the brake while pushing the gas. It also adds extra traction and fully eliminated my foot from slipping off.
It is just 2 foot peg tops off a Honda Rancher(es), Rubicon, or Rincon. Brake is the full peg. Gas is cut to fit.
I would recommend this to anyone who rides in mud, had big boots, or wants full control as a way to eliminate roll back when accelerating.

Here is the Honda part # 50610-HP5-600. Need 2 units to do both pedals.

 

[scott]

The one on gas do you just cut the peg in half?


Sent from my iPhone using Tapatalk

 

[Hondasxs]

The one on gas do you just cut the peg in half?

Ya, just cut it to the length of the gas pedals as u see fit. Drill holes off center to mount it so u miss the bracket underneath. Brake side just bolts on with some washers.

 

[scott]

Just ordered some. Partzilla is where I got them. Cheap cycle parts wanted $20 for shipping. Total at Partzilla was $13 shipping and the 2 steps.


Sent from my iPhone using Tapatalk

 

[hydrantman]

I did notice them at Windrock, this was my problem on my spills, goosed the gas pedal by mistake no foot on the brake pedal. I also just ordered from Partzilla. Great Idea!

 

[Hondasxs]

I must say, after some use this may be the best mod I have done. Couldn't get my foot to slip off of I tried.

 

[scott]

I did it too works great. Going to try the gas peddle long and see it I like it. If not I will cut in half and leave sideways or turn longways.

 

[bobbyhill]

So far there are three of you doing this mod. I'm interested to hear all of your views and tips concerning this.

 

[Hondasxs]

And here is the mod on my Honda Pioneer 1000.