M
I know there are 100 posts about the Tru system but wanted to get a second opinion before I go freeze my hands to fix. Last night I used the headlights to field dress a deer then when I went to leave my Pioneer 1000 wouldn't start so obviously I have this thing wired wrong.
The only thing that I can see is I don't have the ground from second battery going to the frame but back to solenoid that I have seen in some digrams. Not sure why I would have done that unless the instructions said so but can't find original. Note: red wire is actually too negative but cable was too short so swapped them.
Thoughts on what I have messed up?
![PXL 20231209 143202103 PXL 20231209 143202103](https://hondasxs.com/data/attachments/410/410608-df8219f11f8473d48c66a42b65113fea.jpg)
The only thing that I can see is I don't have the ground from second battery going to the frame but back to solenoid that I have seen in some digrams. Not sure why I would have done that unless the instructions said so but can't find original. Note: red wire is actually too negative but cable was too short so swapped them.
Thoughts on what I have messed up?
![PXL 20231209 1428585822 PXL 20231209 1428585822](https://hondasxs.com/data/attachments/410/410607-02012225b345c60d85bd1ff6c5071dc6.jpg)
![PXL 20231209 143202103 PXL 20231209 143202103](https://hondasxs.com/data/attachments/410/410608-df8219f11f8473d48c66a42b65113fea.jpg)