P700 Tire size going to 27's

03mossy

03mossy

Well-Known Member
Jun 20, 2018
276
1,088
93
MN
Ownership

  1. 700-4

  2. Other Brand
Livefromthetree- You gotta stop posting those pics... Your pushing me over the edge on ordering those tires costing me money lol. That second pic especially!
 
livefromthetree

livefromthetree

It was a damn good ride. Seriously good.
Supporting Member
Jun 4, 2020
466
1,309
93
Mount Vernon Indiana
Ownership

  1. 700-2
From the same drive. Maybe these will push you over the edge :p

20200822 222853
20200823 110141
 
  • Like
Reactions: Lady01 and Mudwing
DBD

DBD

Active Member
Jun 10, 2020
67
141
33
Pennsylvania
Ownership

  1. 700-4
Mine didn't but I had a home brew 3-4" lift based on 2" StrongMade

View attachment 47824

View attachment 47825
Have you done anything new with axles, Rhono's? I have a super atv lift with commander shocks. Removed the lift and just running the shocks for now but I need more reach so I can let the shocks stretch with a lift on. Until I can save enough for portals, anyway.
 
  • Like
Reactions: Lady01
ohanacreek

ohanacreek

My EcoBoost has I4WD
Moderator
Lifetime Member
Jul 25, 2013
11,346
32,048
113
Shelby County, Alabama
Ownership

  1. 1000-5
Have you done anything new with axles, Rhono's? I have a super atv lift with commander shocks. Removed the lift and just running the shocks for now but I need more reach so I can let the shocks stretch with a lift on. Until I can save enough for portals, anyway.

I sold it several years ago, sorry.
 
L

lowrider

Well-Known Member
Lifetime Member
Nov 1, 2020
1,741
3,688
113
Idaho Panhandle
Ownership

  1. 700-2
Yes, great pictures!
Couldn't help but notice the exit side of your muffler appears to be a lot bigger than the finger size pipe I have on mine. Probably still has a spark arrestor inside. Did you build that and is it stainless? I have some 1 3/8" stainless left over from an airplane headers I built that might work? Is it a lot louder?
 
  • Like
Reactions: Lady01
DBD

DBD

Active Member
Jun 10, 2020
67
141
33
Pennsylvania
Ownership

  1. 700-4
Yes, great pictures!
Couldn't help but notice the exit side of your muffler appears to be a lot bigger than the finger size pipe I have on mine. Probably still has a spark arrestor inside. Did you build that and is it stainless? I have some 1 3/8" stainless left over from an airplane headers I built that might work? Is it a lot louder?

I have the same one, flat screen spark arrested. Definitely a deeper tone. As far as loud. Not too bad on slower through the trails, though it may be a bit louder at full throttle.
Screenshot 20201119 161509
 
DBD

DBD

Active Member
Jun 10, 2020
67
141
33
Pennsylvania
Ownership

  1. 700-4
Thanks DBD
ANy increase in performance you can feel or just a better tone?
I'm running 28 10 12 Blackwater Evolutions on mine and before the tip swap it would power out at very low rpm. (I also have a 2 1/2" snorkel by warrior riser which is actually less restrictive than the factory intake box) Now it will spin and even hop a little in 4 lock with 4 people in it, so I'd say the main thing is it improved the lowest end torque. As for acceleration, like 0-20 I don't know if it's much quicker... Sounds faster. Lol! Then again it's not a sport buggy.
 
advertisement
L

lowrider

Well-Known Member
Lifetime Member
Nov 1, 2020
1,741
3,688
113
Idaho Panhandle
Ownership

  1. 700-2
I'm getting 27x11x12 so it's probably worth the investment...just don't want it real loud.
Thanks!!
 
  • Like
Reactions: Lady01
JimmyA

JimmyA

Well-Known Member
Oct 8, 2017
1,644
5,504
113
Northeast texas
Ownership

  1. 700-4
I'm running 28 10 12 Blackwater Evolutions on mine and before the tip swap it would power out at very low rpm. (I also have a 2 1/2" snorkel by warrior riser which is actually less restrictive than the factory intake box) Now it will spin and even hop a little in 4 lock with 4 people in it, so I'd say the main thing is it improved the lowest end torque. As for acceleration, like 0-20 I don't know if it's much quicker... Sounds faster. Lol! Then again it's not a sport buggy.
Do you have a link for the snorkel kit?
 
  • Like
Reactions: Lady01
J

johnfrit

New Member
Apr 13, 2021
1
2
1
85248
Ownership

  1. 700-4

  2. 1000-5
If I change out my 25 inch tires on my Pioneer 700 to 27 inch tires I will need all new 27 inch rims, right?
 
sporttrac4x4

sporttrac4x4

Well-Known Member
Lifetime Member
Jan 7, 2016
1,177
2,083
113
ILL.
Ownership

  1. Other Brand
If I change out my 25 inch tires on my Pioneer 700 to 27 inch tires I will need all new 27 inch rims, right?
No, But easier to already have the tires installed on the rim's and shipped to you.
 
Mudwing

Mudwing

Well-Known Member
Lifetime Member
Jul 9, 2017
36,959
306,670
113
The Mud holes
Ownership

  1. 700-4
If I change out my 25 inch tires on my Pioneer 700 to 27 inch tires I will need all new 27 inch rims, right?
You can Mount on stock rims as long as the width is not too wide of the new tyre. 😎
 
  • Like
Reactions: Backwoods
advertisement