Nerf bars with under floor protectors

Had Nerf bars on the machine I sold{ kept them}, so I cut them down and mounted them onto my pioneer. I figured that I may as well add in the under floor protector's as well. I used a piece of salvaged Alum. for the protector. There's enough room to easily wash out any mud etc; .I mounted them to the frame with a piece of angle iron that's bolted to the frame.I removed the plastic frame caps and had no problem putting a nut inside the frame to hold the mounts on.

Here's a pic of them underneath.There made from 1" x 100 wall square tubing,so they'll take a hit and stand up.But like anything else it depends on how hard you hit on something. :lol:

Took some pics for you hope this is what your wanting to see. Took some looking down from under the seat and there is lots of room for a battery in there. When I get a chance I was hoping to put some sort of storage in that area.