P1000m5 28" tires, ITP wheel size?

[msstate56]

I recently purchased a green 1000-5, and I want to add new wheels and tires. I'm leaning towards 28" Maxxis Zillas 28/9-14 front, 28/11-14 rear on ITP SS212 or SS316 wheels. I've had good luck with Zillas in 27" on my previous atv. Primary use is duck hunting in flooded fields and timber/ cypress swamps and food plot management.

First- I know the bolt pattern is 4x136mm, but is everyone using 4x137mm pattern aftermarket wheels?

Second- the ITP SS212 14" wheels come in 6" wide front and 8" wide rears. The SS316 is 7" wide only. The factory wheels are wider in the rear, and since I want a "skinny/wide" tire setup, would the 6"/8" wheels be better?

Anyone else using a similar setup? Any other advice?

 

[msstate56]

Really? Nobody?

 

[CaptainGadget]

i have 30 inch outback max on mine and it rides really smooth and handles them very well, with the 30's we also put on highlfter front a arms and it moved the wheels 2.5 inches forward

 

[msstate56]

What wheels are you using?

 

[CaptainGadget]

 

[msstate56]

Are those 14x7 wheels? With a 4x137 bolt pattern? I just want to confirm that people are using 4x137mm wheels on their P1000 before I buy some.

 

[CaptainGadget]

Yes That is correct

 

[P1k]

Did you install a lift to clear those 30" outbacks or just the arched forward highlighter arms?

 

[CaptainGadget]

Just the arms

 

[P1k]

Im looking to do the same. I cant lift the bike due to my toy hauler clearance. Do they rub at all? How does the bike handle the 30's in the thick mud?

 

[CaptainGadget]

We have ours in a inclosed trailer it is a tight fit we want to do the lift kit also but to do that were going to have to chop the top, the sxs turns the 30's no problems

 

[P1k]

Ok thanks for you input, this will help me. Also do the tires rub on the fenders at full turn?

 

[CaptainGadget]

No not with the 2' forward and hl also puts a steering stop in the kit

 

[msstate56]

Update:

I put a set of Zillas on my P1K5. I went with 28"x9"-14 front, 28"x11"-14 rear on 14x6 (4+2) front, 14x8 (5+3) rear ITP 212 black wheels. Everything fit great and tire are an inch taller that stock black stones.

However when I put the full Trail Armor skid plate on, I had to trim about a 1.5"x 8" out of the wheel well part of the skid.