P1000 Anyone add cargo bed tie downs?

[TumaloKeith]

The one in each corner is ok. The bed is mostly plastic, so I wonder if anyone has added any additional tie down. Even gun/bow racks etc, do you just screw them into the plastic.

 

[Admin]

 

[TimG]

The one in each corner is ok. The bed is mostly plastic, so I wonder if anyone has added any additional tie down. Even gun/bow racks etc, do you just screw them into the plastic.

I put a couple eye bolts in the front of my bed about 10 inches back on each side to secure my tool box. I drilled thru the bed put washers and nuts on the under side. Works great just make sure there is nothing under the bed you would drill into or bolts will interfere with.

 

[TripleB]

Dirty machine and crappy pic but I put these on every bed screw. They're very convenient.

https://www.amazon.com/gp/aw/d/B07H9ZKRH6?tag=sxsweb24-20

 

[TripleB]

I also use these on the vertical part of the bed toward the cab. 1 in every screw hole. I also used a few of the smaller ones on the bed floor of the 5 seater. Just in the places that wouldn't allow the bigger ones from the post above.

https://www.amazon.com/gp/aw/d/B079DQ55SH?tag=sxsweb24-20

 

[BigB_P1K_Rider]

I struggled one what to do as I like to bring different thing depending on what type of riding I'm doing, I picked up these E-Track Rails, Cut them to fit and was able to position them that I could drill threw the bed liner on the High ribs and use 1 inch length 1/4" bolts with fender washers and nylon lock nuts underneath. now I can pretty well snap in a snap lock easily to tie down any thing, tool boxes, coolers, chain saws, spare tire, jacks etc. Total project cost less than $300 cdn

 

[mikeholley]

View attachment 218612
I also use these on the vertical part of the bed toward the cab. 1 in every screw hole. I also used a few of the smaller ones on the bed floor of the 5 seater. Just in the places that wouldn't allow the bigger ones from the post above.

https://www.amazon.com/gp/aw/d/B079DQ55SH?tag=sxsweb24-20

This is possibly one of the best solutions and the cheapest for adding more places to connect in the bed of the Pioneer. You can easily add multiple D-rings in minutes using the bolts in the bed without all the work of the other solutions.

 

[Jsquared]

View attachment 218611
Dirty machine and crappy pic but I put these on every bed screw. They're very convenient.

https://www.amazon.com/gp/aw/d/B07H9ZKRH6?tag=sxsweb24-20

I used a similar style anchor point. Those bed screws are in there really right, and I had to use a hand impact driver (the kind you hit with a hammer) to knock them loose. I added a few in the back so that I can anchor my daughter’s car seat in. Seems to work well.

 

[Bandman]

View attachment 218612
I also use these on the vertical part of the bed toward the cab. 1 in every screw hole. I also used a few of the smaller ones on the bed floor of the 5 seater. Just in the places that wouldn't allow the bigger ones from the post above.

https://www.amazon.com/gp/aw/d/B079DQ55SH?tag=sxsweb24-20

View attachment 218612
I also use these on the vertical part of the bed toward the cab. 1 in every screw hole. I also used a few of the smaller ones on the bed floor of the 5 seater. Just in the places that wouldn't allow the bigger ones from the post above.

https://www.amazon.com/gp/aw/d/B079DQ55SH?tag=sxsweb24-20

TripleB,

I used your link, ordered the hooks, installled them and they are exactly what I needed!

Thank you!

 

[WagginTail]

TripleB,

I used your link, ordered the hooks, installled them and they are exactly what I needed!

Thank you!

Me too. Thanks for the idea @TripleB