P1000 different offset front to rear?

[GRANITE]

I found a deal on some wheels and tires for my P100-5 but have a odd setup. They are all 14x7" wheels but the fronts are 5+2 offset and the rears are 4+3 offset. I know this would work fine but would you still need spacers in rear if the offset was slightly wider already in rear from the wheel offset? Help please?

 

[Admin]

 

[trigger]

Probably not, it should be close to an even track width. The only problem with that setup is you won't be able to rotate or have a common spare.

 

[Mopower58]

Should be close, but like Trigger said you wouldnt have a common wheel front to rear. I would do it but I don’t swap my tires front to rear and hope not to have a flat!

 

[Smitty335]

Probably not, it should be close to an even track width. The only problem with that setup is you won't be able to rotate or have a common spare.

True, on track width. I ride in the woods, that's my set up. I don't have a spare but I keep really good tires on Rooster and run bead locs for lower tire pressures.

 

[GRANITE]

Probably not, it should be close to an even track width. The only problem with that setup is you won't be able to rotate or have a common spare.

Yea I figured that but for $400 bucks I thought I could just make it work for awhile lol

 

[Smitty335]

Good Morning!

 

[trigger]

Good Morning!

😆 Morning Kernel

 

[Robobrainiac]

Just out of curiosity, if you are wanting a matched set of replacement wheels, $400 for a full set of four is easy to find if you are not picky.

 

[Backwoods]

Or you could buy them since they are cheap enough and buy two more wheels to have all 4 offsets the same. I personally would run them like they come.

 

[GRANITE]

Just out of curiosity, if you are wanting a matched set of replacement wheels, $400 for a full set of four is easy to find if you are not picky.

With new 8ply ITP tires with them? lol

 

[Robobrainiac]

With new 8ply ITP tires with them? lol

If they come with tires then that is a good deal.