P1000 Emp bumper measurements if possible

[CumminsPusher]

Just wondering if anyone with an EMP rear bumper was close enough to measure. I'm looking for how much clearance while tailgate is open. Any help very appreciated. Thanks!

 

[Admin]

 

[popeye]

I will get you some when i get home if no one beats me

Sent from my LGMS631 using Tapatalk

 

[JTW]

I put those tow rings on the back of mine and they rub the bumper brackets slightly when raised

 

[popeye]

Just wondering if anyone with an EMP rear bumper was close enough to measure. I'm looking for how much clearance while tailgate is open. Any help very appreciated. Thanks!

So with my home made tail gate cables that let the tail gate rest just past flat i have 3/8" clearance.

Sent from my LGMS631 using Tapatalk

 

[popeye]

Just wondering if anyone with an EMP rear bumper was close enough to measure. I'm looking for how much clearance while tailgate is open. Any help very appreciated. Thanks!

So assuming your tail gate is perfectly flat with the bed you will be fine.

Sent from my LGMS631 using Tapatalk

 

[popeye]

Just wondering if anyone with an EMP rear bumper was close enough to measure. I'm looking for how much clearance while tailgate is open. Any help very appreciated. Thanks!

Any other measurements?

Sent from my LGMS631 using Tapatalk

 

[CumminsPusher]

Any other measurements?

Sent from my LGMS631 using Tapatalk

I was concerned because we've got the rear appliqué that I added but that sounds good but won't be able to use longer hinges lol. How far past the lower edge out from tailgate does that sit.


Sent from my iPhone using Tapatalk

 

[popeye]

I was concerned because we've got the rear appliqué that I added but that sounds good. How far past the lower edge out from tailgate does that sit.


Sent from my iPhone using Tapatalk

Not exactly sure i understand what you want measured but here is this

Sent from my LGMS631 using Tapatalk

 

[popeye]

Sent from my LGMS631 using Tapatalk

 

[popeye]

I was concerned because we've got the rear appliqué that I added but that sounds good but won't be able to use longer hinges lol. How far past the lower edge out from tailgate does that sit.


Sent from my iPhone using Tapatalk

Is your rear applique a fancy name for your wheelie bar?

Sent from my LGMS631 using Tapatalk

 

[CumminsPusher]

Is your rear applique a fancy name for your wheelie bar?

Sent from my LGMS631 using Tapatalk

Perfect thank you!
That would be a very politically correct name for that though lol. I needed to know clearance for that and what I was referring too was this it adds 1/4 inch to tailgate as it's down. Hard to figure these things out sometimes and this back area is a bit of a puzzle. Looks like everything will go.


Sent from my iPhone using Tapatalk

 

[popeye]

Perfect thank you!
That would be a very politically correct name for that though lol. I needed to know clearance for that and what I was referring too was this it adds 1/4 inch to tailgate as it's down. Hard to figure these things out sometimes and this back area is a bit of a puzzle. Looks like everything will go.


Sent from my iPhone using Tapatalk

Should of gone with blue tape. Its less transparent lol

Sent from my LGMS631 using Tapatalk

 

[popeye]

Perfect thank you!
That would be a very politically correct name for that though lol. I needed to know clearance for that and what I was referring too was this it adds 1/4 inch to tailgate as it's down. Hard to figure these things out sometimes and this back area is a bit of a puzzle. Looks like everything will go.


Sent from my iPhone using Tapatalk

And i forgot how good of a job you did on your tail gate came out ridiculous

Sent from my LGMS631 using Tapatalk

 

[CumminsPusher]

And i forgot how good of a job you did on your tail gate came out ridiculous

Sent from my LGMS631 using Tapatalk

Thank you buddy. it's nice to have good people on the site willing to help. Keeps some costly mistakes down.


Sent from my iPhone using Tapatalk