JACKAL
Ancient Honda fanboi
Moderator
Lifetime Member
Supporting Member
Club Contributor
Hey guys, I am wanting to sell my 34' enclosed trailer I had special ordered in May of 2016 from Empire Cargo out of GA. I pretty much used it to move from IL to TN and thought it would be great to haul up to 3 full size SXS. Turns out it is just too long for the mountain roads I moved to and sits low enough in the back I drag a little on the dips and inclines on the 9% grade road to my house. So I ended up getting a 22' open bed trailer to haul SXS on.
About the trailer for sale. Got it new on May 16th 2016 it has about 3400 miles on it total. It is 34' Long X 8.5' wide x 7.5' high inside (an additional 12" height)> has heavy rubber tread plate flooring and 5K lbs. D-rings in floor welded to frame. Inside is a full 34' long + 2' additional V-nose it will fit 3 Pioneer 1000-5s and an ATV or up to 9 ATV's. It has a 15,600 # GVWR, weighs 4200# Empty, letting you haul up to 11,400# of cargo, it has 3 Dexter 5200 Lb axles with electric brakes. The door is also full height so all P1K roll cages clear with ease even with 3" lifts and 30" tires, etc. The hitch is a standard 2 5/16" ball. Overall length is 38' long.
The pictures below were taken when new, it has only a few small dings on the ramp door where it got lowered in gravel, and a gouge in the loading ramp rubber floor where my gun safe slipped wile moving it out of the trailer. The 2.5" rear aluminum trim on the very back corners on the bottom is deformed on the back 12" due to occasional dragging I couldn't avoid, all due to how low it is with the overhang. I will try to get recent pics as soon as I can get the snow and Ice off of it.
For anyone on here I am asking $7,000 for it and will deliver for free within 500 miles of Knoxville, TN but I would be willing to make other arrangements to a serious buyer. If not sold on here in a few weeks will be listing on eBay motors for $7500.00 To get one new would cost close to $9500 plus tax etc. Thanks for looking.
About the trailer for sale. Got it new on May 16th 2016 it has about 3400 miles on it total. It is 34' Long X 8.5' wide x 7.5' high inside (an additional 12" height)> has heavy rubber tread plate flooring and 5K lbs. D-rings in floor welded to frame. Inside is a full 34' long + 2' additional V-nose it will fit 3 Pioneer 1000-5s and an ATV or up to 9 ATV's. It has a 15,600 # GVWR, weighs 4200# Empty, letting you haul up to 11,400# of cargo, it has 3 Dexter 5200 Lb axles with electric brakes. The door is also full height so all P1K roll cages clear with ease even with 3" lifts and 30" tires, etc. The hitch is a standard 2 5/16" ball. Overall length is 38' long.
The pictures below were taken when new, it has only a few small dings on the ramp door where it got lowered in gravel, and a gouge in the loading ramp rubber floor where my gun safe slipped wile moving it out of the trailer. The 2.5" rear aluminum trim on the very back corners on the bottom is deformed on the back 12" due to occasional dragging I couldn't avoid, all due to how low it is with the overhang. I will try to get recent pics as soon as I can get the snow and Ice off of it.
For anyone on here I am asking $7,000 for it and will deliver for free within 500 miles of Knoxville, TN but I would be willing to make other arrangements to a serious buyer. If not sold on here in a few weeks will be listing on eBay motors for $7500.00 To get one new would cost close to $9500 plus tax etc. Thanks for looking.
