Guage cluster relocation with 2023 Honda parts

[highpocket74]

Seems like I've read about this somewhere. I was wondering if anyone here had experience with making the swap using the factory parts and could point me in the right direction? Any guidance would be appreciated.

Looks like I need item numbers:
15,14,4,7,8, and some screws

 

[906UP]

I did it w factory parts, you need 14-17 from this page and the bottom plate (F-8) from the steerimg column schematic. The column is missing a bracket that is welded on the 23 models, I built my own.....you'll see what I mean

 

[906UP]

Also, you don't need #4 (harness), it wouldn't work anyway. Just do the wire mod like you would for an aftermarket kit