H.F.A.W.H.A. meeting

[ohanacreek]

Is all your s*** broke or something? I've not seen you post and riding pictures lately.

Let’s be honest, it’s well within the realm of possibility.

 

[Admin]

 

[CumminsPusher]

Is all your s*** broke or something? I've not seen you post and riding pictures lately.

Pioneer is down. The amount of crap I’ve got to do far exceeds the pocket book right now, trying to get some side work to get er done. Wolverine is still running fine but it’s only two seats obviously so not the family rig. It needs some attention on the body though.
Behind I know but, last year was a long one that decimated everything, hard to do repairs when we went up every single weekend forever like we did. We will get back at it!

 

[ProudDadOf5]

Pioneer is down. The amount of crap I’ve got to do far exceeds the pocket book right now, trying to get some side work to get er done. Wolverine is still running fine but it’s only two seats obviously so not the family rig. It needs some attention on the body though.
Behind I know but, last year was a long one that decimated everything, hard to do repairs when we went up every single weekend forever like we did. We will get back at it!

Damn that sucks CP. At least it went out having fun!! I hope you get it up & going soon buddy..

 

[JACKAL]

HFAWHA approved "To Do List spinner chart 👍

 

[CumminsPusher]

Damn that sucks CP. At least it went out having fun!! I hope you get it up & going soon buddy..

Oh she’ll be back up and going soon enough. Didn’t mean to sound bummed out. Everything took a beating last year, was a great year! Can’t wait to do it again

 

[ProudDadOf5]

Oh she’ll be back up and going soon enough. Didn’t mean to sound bummed out. Everything took a beating last year, was a great year! Can’t wait to do it again

Glad it’s not that bad, 😉. Sounds like a plan brother. 🍻

 

[Adam490]

Oh she’ll be back up and going soon enough. Didn’t mean to sound bummed out. Everything took a beating last year, was a great year! Can’t wait to do it again

What's wrong with the Pioneer?

 

[NTCPrezJB]

HFAWHA approved "To Do List spinner chart 👍

View attachment 188473

It seems the drink a beer slice of the pie is not properly proportionate for this group. 🤷‍♂️ Maybe the arrow is attached to a very balanced and free spinning bearing and the arrow itself is heavily weighted at the end?

 

[Plumber32]

 

[CumminsPusher]

What's wrong with the Pioneer?

Front axle broke, rear axle bent, bent tie rod but it’s got play in the steering box, both nurf bars need replaced doors don’t shut good, needs tire swapped to replacement wheel where it got wallered out and hub assembly, rear winch needs new ground cable and line, front needs line and new remote, adjust camber all 4 corners because of the new spring setup. Rear pumpkin seeps, think from bent axle. Then all fluids and filters.
That’s about it from the things that cost or pain in ass. It’s a lot but kinda feels good to finally make a list, gotta just start plugging away. Did a ton at the end of last year so I wouldn’t have as much now but Spring is closing in.

 

[Adam490]

Front axle broke, rear axle bent, bent tie rod but it’s got play in the steering box, both nurf bars need replaced doors don’t shut good, needs tire swapped to replacement wheel where it got wallered out and hub assembly, rear winch needs new ground cable and line, front needs line and new remote, adjust camber all 4 corners because of the new spring setup. Rear pumpkin seeps, think from bent axle. Then all fluids and filters.
That’s about it from the things that cost or pain in ass. It’s a lot but kinda feels good to finally make a list, gotta just start plugging away. Did a ton at the end of last year so I wouldn’t have as much now but Spring is closing in.

Good lawd!! That'll keep ya busy for a few minutes

 

[CumminsPusher]

Good lawd!! That'll keep ya busy for a few minutes

I know right? That’s why been slow on it all. I always have to do side work to pay for play so that means twice the work lol. Getting there in the side stuff

 

[farmtimpioneer]

Front axle broke, rear axle bent, bent tie rod but it’s got play in the steering box, both nurf bars need replaced doors don’t shut good, needs tire swapped to replacement wheel where it got wallered out and hub assembly, rear winch needs new ground cable and line, front needs line and new remote, adjust camber all 4 corners because of the new spring setup. Rear pumpkin seeps, think from bent axle. Then all fluids and filters.
That’s about it from the things that cost or pain in ass. It’s a lot but kinda feels good to finally make a list, gotta just start plugging away. Did a ton at the end of last year so I wouldn’t have as much now but Spring is closing in.

If You didn't live all the way on the other end of the Country would be glad to help, Things can get out of hand and it is a continual battle to keep things going,, Hope it smooths out for You Very Soon,,,,,,👍

 

[CumminsPusher]

If You didn't live all the way on the other end of the Country would be glad to help, Things can get out of hand and it is a continual battle to keep things going,, Hope it smooths out for You Very Soon,,,,,,👍

Ya I wish there were more local enthusiasts here. I’d love to drink a few beers helping others.

 

[Buggyman]

View attachment 188478

LMAO

 

[CumminsPusher]

Cheers Smellers!

 

[TripleB]

Cheers Smellers!
View attachment 188537

You need some lotion on those hands. Lol

 

[CumminsPusher]

You need some lotion on those hands. Lol

 

[joeymt33]

Cheers to hard-working hands that could use some lotion

 

[TripleB]

Cheers to hard-working hands that could use some lotion

View attachment 188548

Definitely need some lotion! Lol